VPLS problem in ros 6.0rc4

RouterOS General
1

Can’t add BGP-VPLS in RoS 6.0rc4

both through GUI or cmd. RB2011L

interface vpls bgp-vpls add name=10 route-distinguisher=10:
0 import-route-targets=10:0 export-route-targets=10:0 site-id=8 bridge=britge.10 b
ridge-horizon=1 
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)

Is it really stable ?

Static VPLS not working as well

interface vpls add vpls-id=10:0 remote-peer=1.1.1.1
action timed out - try again, if error continues contact MikroTik support and send
 a supout file (13)

Error: couldn’t add New Interface: timeout

2

only standard vpls over ldp are working at the moment

a+
Thierry

3

sorry, what is standard VPLS?
isn’t there two types of vpls static (standard as i know) and BGP VPLS.

and while testing both VPLS variants wasn’t working…see my message above.