I would like to know how to route traffic from a pptp win 7 client connected to an rb951G-2hnd (pptp server) to a remote dekstop server session via pppoe adsl. The remote desktop server 192.168.0.12 is on a switch with a cyberoam cr50i device as a gateway 192.168.0.254. The rb951 is connected to the same switch with the server, through an RB ether interface configured with ip 192.168.0.253 at the same subnet as the server and cyberoam. The Rb is connected with an adsl line through a pppoe client interface via an rb ether interface configured with ip 192.168.1.2 of the same range as the adsl modem is (which is in bridge mode). I can connect to the rb through pptp, but I cannot access the remote desktop server. The PPTP profile local address is 172.16.1.1, and the remote address is picked up from an ip pool of 192.168.88.1-20
How to route traffic?
I have scrnat the ether interfaces and the 2 subnets. In firewall I have allowed forward from the two subnets.