Hello,
I have the following setup
1 Routerboard acting as an OVPN server
2 Routerboards that connect to the OVPN server Routerboard.
So on the server side I have defined 2 OVPN server bindings. I have done this to setup routes back from the OVPN server routerboard to the VPN client routerboards networks. If there is a better way to do this , please let me know.
This works , but once every day or two for some reason the incoming VPN connection decides not to use the server binding. This then means that the routing to these gateways do not work. To fix it I just disable the VPN connection on the client and then re-enable it. Then all is fine a gain for a day or two.
How do I fix this issue ? I have upgraded all the routers to 6.40.5