Hello,
I’m not an network expert so that’s why I’m asking you to point me out for best solution how to achieve this setup.
I have CRS125-24G-1S-RM MikroTik that should be configured to do the following:
WAN - ether1 - pppoe connection for internet
Office network - ether2, ether3, ether4 - 10.1.1.0/24 for office network
Testing network - ether5, ether6 - 10.1.2.0/24 network used for cctv equipment and all other equipment that’s for testing and requires network
Guest Hotspot - ether7, ether8 - 10.1.3.0/24 network used for guests that visit our office and should be allowed to access internet but can’t access other two networks
Office and testing networks should be able to see all three networks.
A side from that, I’d like to create VPN on which I can remotely connect and get assigned IP address from office pool (if some colleague wants to work remotely).
Thanks,
shkabo