# WAN on bridge with LAN

**URL:** <https://forum.mikrotik.com/t/wan-on-bridge-with-lan/139832>\
**Category:** General\
**Created:** [May 24, 2020, 7:13pm UTC](https://forum.mikrotik.com/t/wan-on-bridge-with-lan/139832 "2020-05-24T19:13:23Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![awbl](https://forum.mikrotik.com/letter_avatar/awbl/32/6_449c533f586939b6e5f246632a46421f.png) [@awbl](https://forum.mikrotik.com/u/awbl)\
**Post date:** [May 24, 2020, 7:13pm UTC](https://forum.mikrotik.com/t/wan-on-bridge-with-lan/139832/1 "2020-05-24T19:13:23Z")

</div>

I’ve been running a RB750GR3 with my internet modem plugged into a physical ethernet port, but I’m considering relocating the RB to the central location in my home that most LAN traffic passes through. That location currently houses a switch. Doing so would mean that the modem and RB won’t be colocated though, and internet traffic will have to travel over a VLAN trunk to the RB alongside LAN traffic (in its own VLAN of course). I’ve successfully mocked up how I think this would work in the RB, but I’m wondering if there’s some reason why I shouldn’t set it up this way and would like to vet it with those of you far more knowledgable than me.

The mock up treats the WAN port as an untagged VLAN access port on the same bridge used for the LAN (i.e., physical port on the bridge, physical port included as untagged on a bridge VLAN, logical VLAN interface on bridge), and the DHCP client is configured on the logical VLAN interface associated with the WAN’s VLAN. Of course, the WAN’s VLAN would have to be tagged on the trunk port if I did the relocation. All NAT, mangle, firewall, and queue rules were updated to refer to the VLAN interface, but no new rules were added. The VLAN interface was assigned the external IP address as expected, and internet access including the queue seems to work just fine. Considering the WAN interface typically wouldn’t be bridged with the LAN, I’m wondering if this config sets me up for trouble. Absent filtering, I can see how it might, but I’m thinking the default routing table coupled with the firewall rules I’ve been using will address that assuming they were/are reasonable. Am I missing something?

---

_[View the full topic](https://forum.mikrotik.com/t/wan-on-bridge-with-lan/139832)._
