Hello !
I have CAPsMAN running on rb2011 and have hAP ac, hAP ac lite, cAP connected to it and it works.
Now, Im connecting wAP ac to it and when I try connecting clients to it, wAP ac disconnects wrom CAPsMAN with log entry “CAP disconnected from rb2011”
No other CAP gets disconnected in the same fashion as wAP ac does.
Can you help me please?
I did more testing, it still disconnects.
Can somebody guide me into troubleshooting please?
Mikrotik support is not responding …
If you want help, you need at least post some more information like a network diagram, configurations and the like.
This is my setup:
adsl - rb2011-lan cable -switch - 4 lan cables, to hap_ac, hap_ac_lite, cap, wap_ac
CAPsMAN on rb2011 register all CAP.
Originally there were hap_ac, hap_ac_lite and cap and it ran good, clients roaming between mtiks.
I added wap_ac, reset it to defaults, setup as CAP, connect to CAPsMAN, all look good, just like rest of CAPs sitting in CAPsMAN.
When there would be more than 2-3 clients connected to either wap 2.4 or wap 5, the problem would arise, wap_ac would disconnect and reconnect to CAPsMAN right away.
Wap_ac temperature would be 60-70 C.
When i would test wap_ac as standalone access point, no problems, 10 clients and all good, no hiccups.
Heres configuration:
/caps-man channel
add band=2ghz-b/g/n extension-channel=disabled frequency=2412 name=2412
width=20
add band=2ghz-b/g/n extension-channel=disabled frequency=2437 name=2437
width=20
add band=2ghz-b/g/n extension-channel=disabled frequency=2462 name=2462
width=20
add band=5ghz-onlyac frequency=5240 name=5240 width=20
add band=5ghz-onlyac frequency=5180 name=5180 width=20
add band=5ghz-onlyac frequency=5320 name=5320 width=20
/caps-man security
add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm
name=security1
/caps-man access-list
add action=accept disabled=no signal-range=-80..120 ssid-regexp=“”
add action=reject disabled=no signal-range=-120..-81 ssid-regexp=“”
add disabled=no ssid-regexp=“”
/caps-man configuration
add datapath=datapath1 disconnect-timeout=15s distance=indoors
frame-lifetime=0ms hw-protection-mode=rts-cts hw-retries=15 mode=ap name=
MT24 security=security1 ssid=MT24G@inet
add datapath=datapath1 mode=ap name=MT5G security=security1 ssid=MT5G@inet
/caps-man datapath
add bridge=lan-local client-to-client-forwarding=yes name=datapath1
add bridge=lan-local client-to-client-forwarding=no local-forwarding=yes
name=datapath2
/caps-man interface
add arp=enabled channel=2462 configuration=MT24 datapath=datapath2 disabled=
no l2mtu=1600 master-interface=none mtu=
1500 name=CAP_cAP_24 security=security1
add arp=enabled configuration=MT5G datapath=datapath2 disabled=no l2mtu=1600
master-interface=none mtu=1500 name=
CAP_hAP_ac_5
add arp=enabled channel=2437 configuration=MT24 datapath=datapath2 disabled=
no l2mtu=1600 master-interface=none mtu=
1500 name=CAP_hAP_ac_24 security=security1
add arp=enabled configuration=MT5G datapath=datapath2 disabled=no l2mtu=1600
master-interface=none mtu=1500 name=
CAP_hAp_ac_lite_5
add arp=enabled channel=2412 configuration=MT24 datapath=datapath2 disabled=
no l2mtu=1600 master-interface=none mtu=
1500 name=CAP_hAp_ac_lite_24 security=
security1
add arp=enabled configuration=MT5G datapath=datapath2 disabled=no l2mtu=1600
master-interface=none mtu=1500 name=
CAP_wAP_ac_5 security=security1
add arp=enabled channel=2412 configuration=MT24 datapath=datapath2 disabled=
no l2mtu=1600 master-interface=none mtu=
1500 name=CAP_wAP_ac_24 security=security1
add arp=enabled configuration=MT24 datapath=datapath2 disabled=yes
master-interface=none mtu=1500 name=
rb2011-1
/caps-man manager
set ca-certificate=auto certificate=auto enabled=yes upgrade-policy=
require-same-version
/caps-man provisioning
add action=create-enabled master-configuration=MT24 name-format=identity
add action=create-enabled master-configuration=MT5G name-format=identity