jrpaz
December 14, 2017, 1:55pm
1
Hi All,
I have an RBwAPR-2nD with a Quectel EC25-V LTE running on RC RoS 6.41.61 and the LTE card just shows up as android under the USB device section.
Do anyone have a wAP-R working with a 3rd party LTE card?
https://wiki.mikrotik.com/wiki/Manual:Peripherals is pretty much useless at this point as I have tried several adapters from here and they just don’t work.
I have sent multiple support requests but no one has been able to address the issue.
jrpaz
December 15, 2017, 1:08pm
2
It’s working now I needed to go to ports - firmware and set the ignore-direct-ip-driver to yes & it reboot.
The issue I have is the same one I had with the Novotel 730L that it would reboot every few seconds and drop the connection.
https://wiki.mikrotik.com/wiki/Cellular_Quectel_modems_01
Check the above tutorial.
After initializing the modem with this: at+qcfg=“usbnet”,1
you will have the LTE interface, what is faster.
dc2
June 23, 2018, 9:01am
4
The above linked tutorial mentions to “tape” the usb3 pins on Ep06 in order for the modem to be recognized. Any idea which are these pins?
omidhe
December 12, 2018, 4:44pm
5
jrpaz:
It’s working now I needed to go to ports - firmware and set the ignore-direct-ip-driver to yes & it reboot.
The issue I have is the same one I had with the Novotel 730L that it would reboot every few seconds and drop the connection.
This method is working !!
Thank you so much