wAP RBwAP2nD power adapter

RouterOS Wireless Networking
1

.

In the manual is written.
“wAP only: Power jack (5.5mm outside and 2mm inside diameter, female, pin positive plug) supports 12-57 V
powering, the device comes with a 24 V 0.8 A power adapter.”

Received wAP’s RBwAP2nD came with 24 V 0.38a power adapters.

Will be used with PoE injector and approximately 30m ethernet cable.

Will the wAP’s work well???

.

2

It depends on the cable you are using. If it is a standart good cable it should work without problems.

3

So 0,38A will be enough. Hm, oki.