Watchdog Timer

RouterOS Wireless Networking
1

Hi all,
My routerboard (RB 600) rebooted itself for no reason, and have this message on its log:

07:00:05 system,error,critical router was rebooted without proper shutdown by watchdog timer

While i checked, it is appeared to be there by default on all of my RB 600. Is this the right setting shall i leave it as it is?

#
/system watchdog 
set auto-send-supout=no automatic-supout=yes no-ping-delay=5m \
    watch-address=none watchdog-timer=yes

I’m using V 3.6 under RB 600. Thanks guys!

2

I believe you need to upgrade to version 3.7 and check that RouterBOARD RouterBOOT version is upgraded,
system routerboard print.
Make sure there is the latest version.

In case you will see the same error again, try to make support output file after reboot or/and check for autosupport file at file print.
Send these files to support@mikrotik.com

3

so i supposed the problem is the same as

http://forum.mikrotik.com/t/rb600-reboot-fix/20103/1

Strangely enough that it only happen to station side, never happen on AP.

I’ll try upgrading then. Thanks!

4

Hi,
I’ve got the same problem on 2 routerboards:
RB 600 + RB 604 +
2x R52H
4 x Sparklan WMIA 166AG
48V/0.7
system is working until I do something or event only look at using winbox .
System 3.7.