Hello,
I’m not sure if this is the right place to ask, so if it isn’t, please move it mods.
I currently have a RB750GL. To this 750 I have my modem connected to Ethernet 1, to Ethernet 2 I have a switch connected,and to Ethernet 3 I have my Unify AP connected.
My network subnets are as follow:
10.0.0.1/24 and 10.0.5.1/24.
I recently purchased a RB951-2n for other reasons. I decided to eventually use the RB951-2n as a WiFi bridge to connect the other side of the house to the network, as I can’t run a network cable from the switch to the other side of the house.
The subnet for the 951 is 10.0.7.1/24. The WDS connection is set up, and I can connect to the 10.0.0.1/24 and 10.0.5.1/24 networks from the 10.0.7.1/24 network,but I can’t connect to the 10.0.7.1/24 networks from the other two networks.
How can I get traffic from the 10.0.0.1/24 and 10.0.5.1/24 networks to the 10.0.7.1/24 networks?