wds + nstream

RouterOS Wireless Networking
1

Hi to all..
I am trying to make wds system with nstream, but two cards wont accociate…
both cards are ap-bridge, same channel, I know dynamic wds wont work, so I put static
when I turn off nstream it connects…

I read in the notes

The settings here (except for enabling nstreme) are relevant only on Access Point, they are ignored for client devices! The client automatically adapts to the AP settings.

WDS for Nstreme protocol requires using station-wds mode on one of the peers. Configurations with WDS between AP modes (bridge and ap-bridge) will not work.

that combining bridge and ap-bridge wont work, but this is both ap-bridge…
also, this worked in 2.9 version as I recall?

thank you

2

What exactly is your question? The notes are CORRECT.

When using Nstreme, there MUST be an AP and a client.
You can’t have two APs.

3

so, there is no way that I can have wds with more ap-bridges with nstream?

4

One ap-bridge or just bridge.
Other one station wds
creat bridge on both and add ether interface and wlan interface
On wireless wds tab choose dynamic and select bridge1

It just works… lots of notes on how to do this in the forum

Scott