WDS setup between MK and Tomato Router

RouterOS Wireless Networking
1

Hello,

I have a set up where I have 1 Tomato Router and 1 DD-WRT router are connected via WDS using WAP AES encryption.

I want to add a MK router rb2011uas-2hnd, but no luck still.

The current setup is like this Tomato ----- WDS ----- DDWRT, I want the following:

rb2011uas-2hnd ----- WDS ---- Tomato ---- DD-WRT.

Therefore, the only set up that would be required is the one on the MK router and the Tomato router.

I’ve tried many setups but I can’t get it to work.


Does someone out there have any experience in this kind of set up and could share his or her configuration?

Thanks,

Ricardo

2

What hardware are you running Tomato and DD-WRT on?

Your usual Linksys with Broadcom chips won’t connect reliably over WDS to Atheros hardware. Sometimes it works, but it is a bit odd.

3

Hi Thanks for the reply.

The tomato does have a broadcom chip. Anyway you would suggest a test that this would be in fact the case. I just want to discard that it is just not a configuration issue.

Thanks!