# webconfig not reachable from Firefox using https

**URL:** <https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365>\
**Category:** Beginner Basics\
**Created:** [February 4, 2024, 2:37am UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365 "2024-02-04T02:37:42Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![ckonsultor](https://forum.mikrotik.com/letter_avatar/ckonsultor/32/6_449c533f586939b6e5f246632a46421f.png) [@ckonsultor](https://forum.mikrotik.com/u/ckonsultor)\
**Post date:** [February 4, 2024, 2:37am UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/1 "2024-02-04T02:37:42Z")

</div>

As I understand, the default access to a Mikrotik router is [http://192.168.88.1](http://192.168.88.1). But Firefox insists on using https even when in Settings I choose “Don’t enable HTTPS-Only Mode” on the Security page. Can’t get to the router. Any hints? Thanks.

---

<div class="post-metadata">

**Author:** ![holvoetn](https://forum.mikrotik.com/letter_avatar/holvoetn/32/6_449c533f586939b6e5f246632a46421f.png) [@holvoetn](https://forum.mikrotik.com/u/holvoetn)\
**Post date:** [February 4, 2024, 6:26am UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/2 "2024-02-04T06:26:03Z")

</div>

Switch browser  
Or  
Enable https access ( www-ssl) ( you can get in using ssh unless that’s also disabled)

2 options.

---

<div class="post-metadata">

**Author:** ![baragoon](https://forum.mikrotik.com/user_avatar/forum.mikrotik.com/baragoon/32/61605_2.png) [@baragoon](https://forum.mikrotik.com/u/baragoon)\
**Post date:** [February 4, 2024, 6:37am UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/3 "2024-02-04T06:37:52Z")

</div>

Use winbox instead of webfig

---

<div class="post-metadata">

**Author:** ![holvoetn](https://forum.mikrotik.com/letter_avatar/holvoetn/32/6_449c533f586939b6e5f246632a46421f.png) [@holvoetn](https://forum.mikrotik.com/u/holvoetn)\
**Post date:** [February 4, 2024, 6:53am UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/4 "2024-02-04T06:53:24Z")

</div>

That is practically the only way I access my devices 😆

But yes, so 3 options there.

---

<div class="post-metadata">

**Author:** ![BBCWatcher](https://forum.mikrotik.com/letter_avatar/bbcwatcher/32/6_449c533f586939b6e5f246632a46421f.png) [@BBCWatcher](https://forum.mikrotik.com/u/BBCWatcher)\
**Post date:** [February 4, 2024, 7:14am UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/5 "2024-02-04T07:14:05Z")

</div>

It’s working for me with Firefox. Have you tried adding a Firefox bookmark pointed to [http://192.168.88.1](http://192.168.88.1) then selecting the bookmark?

---

<div class="post-metadata">

**Author:** ![ckonsultor](https://forum.mikrotik.com/letter_avatar/ckonsultor/32/6_449c533f586939b6e5f246632a46421f.png) [@ckonsultor](https://forum.mikrotik.com/u/ckonsultor)\
**Post date:** [February 4, 2024, 5:41pm UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/6 "2024-02-04T17:41:33Z")

</div>

Thanks to all of you.  
Created the bookmark of http:// but when selected it changed to https:// Will report to Firefox.  
Went to WinBox, which had failed yesterday when connecting via MAC address or IP. Using the IP of the router worked this time. The router and the notebook are cabled directly at 100 Mbps.  
You gotta LOVE computers or you have to move into a tree 🙂

---

<div class="post-metadata">

**Author:** ![normis](https://forum.mikrotik.com/user_avatar/forum.mikrotik.com/normis/32/8_2.png) [@normis](https://forum.mikrotik.com/u/normis)\
**Post date:** [February 5, 2024, 7:07am UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/7 "2024-02-05T07:07:55Z")

</div>

Firefox has strict security settings. There is nothing to report to them, this is by design. You can turn off HTTPS ONLY MODE in Firefox, but they are right, it is dangerous to visit HTTP only sites and enter passwords in them. Don’t do that. Use Winbox, or set up proper HTTPS for Webfig.

---

<div class="post-metadata">

**Author:** ![ckonsultor](https://forum.mikrotik.com/letter_avatar/ckonsultor/32/6_449c533f586939b6e5f246632a46421f.png) [@ckonsultor](https://forum.mikrotik.com/u/ckonsultor)\
**Post date:** [February 5, 2024, 11:40pm UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/8 "2024-02-05T23:40:01Z")

</div>

I gave up on webconfig from firefox.  
Using WinBox I reached the router and apparently changed the LAN subnet to 192.168.55.0/24–the notebook wired to eth5 on the router now gets from dhcp the IP 192.168.55.200. BUT, Winbox no longer can manage the router because it says there is no route to host (when addressing it on 192.168.55.1). This seems to be a different problem so I’ll start a new thread.  
Thanks again for your replies.

---

<div class="post-metadata">

**Author:** ![optio](https://forum.mikrotik.com/letter_avatar/optio/32/6_449c533f586939b6e5f246632a46421f.png) [@optio](https://forum.mikrotik.com/u/optio)\
**Post date:** [February 5, 2024, 11:44pm UTC](https://forum.mikrotik.com/t/webconfig-not-reachable-from-firefox-using-https/173365/9 "2024-02-05T23:44:53Z")

</div>

It is possible to add it as exception for HTTPS-Only Mode in FF settings and for other web sites will be used (there is no need to globally turn off). If local WebFig IP (or hostname if is accessed by it in url) is added there it will work (for me is working in FF on Mac when using url with http:// scheme in it), set exceptions only if local network is considered as trusted. I also _Pi-hole_ admin accessing over http in FF locally…
