What I need to use 4.9Ghz in RouterOS???

RouterOS General
1

Hi

I will start a project and we must use the 4.9Ghz frecuency but I have a doubt about if I need upgrade the license Level 4 or the RouterOS will recognize the card by default.

plz, any suggestions will help me :smiley:

Thanks

Best regard.

2

change the local regulation of the other country is illegal and unethical. Buy a Superchannel license :smiley:

very low cost!

regards


pd: save money to spend on expensive 4.9 cards

3

Thanks for the reply, but I must use 4.9Ghz because is the license to police deparment; so I just need know if with the leve 4 of RouterOS I can will use the 4.9Ghz or I will need buy other license. Because actually in the combotext only apper 5Ghz and 2.4Ghz

Best Regard.

4

they are cards in 2.4 working with frequency convertors, it is because of it that often can be observed nets in this spectrum. It is necessary to look for the suitable channels, in the same way as for one xr9.

regards

5

I have installed these under license for our local government. You need to buy the Custom Frequency Upgrade for each RouterBoard that you are running at 4.9GHz. You can buy thius directly from Mikrotik or from Mikrotik distributors that sell them.

Tom

PS You need this upgrade even if you are using the sr4 card for 4.9GHz.

6

Thank you Tom, this infomation is very helpful for me.

Best regard.