Where do I find PP2P throughput for a routerboard model ?

RouterOS Beginner Basics
1

I am looking for a PP2P (with encryption) throughput for routerboard models. I cannot find it in product brochure.

I need max 5 PP2P sessions on 5/5mbs internet feed.

Will 2011 model be sufficient ? or RB450G ?

2

2011 is perfect to done that.

3

But 2011 and 450G appear to have similar CPU specs,
why would I chose 2011 over 450G ? I only need 3 interfaces, wan and 2 lans.

4

RB2011UiAS-IN / RB2011UiAS-RM: PoE out, 600MHz MIPS 74Kc V4.12 processor, 5 x 10/100, 5x 10/100/1000, 2 chip switch Atheros 8327 (@1000) & Atheros 8227 (@100) , 128.0 MiB RAM, 128.0 MiB internal memory, 1 USB2, 1 RS232, License L5, max MTU 4074 (@1000) + 2028 (@100), (SPF) desktop case / Rackmount

RB2011L: no PoE out, 600MHz MIPS 74Kc V4.12 processor, 5 x 10/100, 5x 10/100/1000, 2 chip switch Atheros 8327 (@1000) & Atheros 8227 (@100), 64.0 MiB RAM, 64.0 MiB internal memory, no USB2, 1 RS232, License L5, max MTU 4074 (@1000) + 2028 (@100)

RB2011LS = RB2011L + SPF
RB2011iL-RM = RB2011L + PoE out + Rackmount
RB2011iLS-IN = RB2011L + PoE out + SPF + desktop case

RB450G: no PoE out, 680MHz MIPS 24Kc V7.4 processor, 5 x 10/100/1000, single chip switch Atheros 8316, 256.0 MiB RAM, 512.0 MiB internal memory, no USB, 1 RS232, License L5, max MTU 1520 (@1000), desktop case


Too much positive match to not prefer RB2011UiAS-IN or RB2011UiAS-RM

5

You can also use one RB951G-2HnD or RB951Ui-2HnD for do that.

But for any hardware, listed in this topic, you chose, all can do that.