Nice homesite upgrade , but I don’t see the netinstall link in downloads. What am I missing?
Select routeros then a version and it will show up.
Thanks , they scared me…lol
You Can Access in
-
Or You Can spesific install with Router Version http://www.mikrotik.com/download.html
-
Select Your Product, Devices..You can download NPK and install in netinstall
UHHH OHHHHH…message over serial..
RouterBoard 800
CPU frequency: 800 MHz
Memory size: 256 MB
Press any key within 2 seconds to enter setup..
kernel not found
trying bootp protocol… failed
kernel loading failed
now what?
Fix up the BOOTP server so the router can access it. It’s unlikely it’s actually unable to boot from the network due to an error on the router, it’s likely to be an error on the network or with the server. Take firewalls into account, particularly if you’re on a recent version of Windows.
RouterBOOT booter 2.28
RouterBoard 800
CPU frequency: 800 MHz
Memory size: 256 MB
Press any key within 2 seconds to enter setup..
kernel not found
trying bootp protocol… OK
Got IP address: 192.168.2.2
resolved mac address 00:50:B6:09:2D:DE
*transfer started … transfer ok, time=3.71s
setting up elf image… OK
jumping to kernel code
Welcome to MikroTik Router Software remote installation
Press Ctrl-Alt-Delete to abort
mac-address: 00:0C:42:72:75:CD
mac-address: 00:0C:42:72:75:CE
software-id: key:
(well I don’t think i need to advertize the key…lol)
Waiting for installation server…
Found server at E0:46:9A:06:8F:D1
Formatting disk…
ERROR: could not format partitions
Press ENTER to reboot
Is this thing bricked , sure seems so…Been sitting on the shelf for 6 months , tried to use it as replacement , fired up fine , setup went ok , climbed the cold tower ,replaced , and then this…
It appears to be.
pity…it lived a total of 15 minutes ( while I was setting it up)…this was a new unit in storage…
write to support about this problem.