Hi,
I want a check the a block diagram for CCR1009 series
where can i find it..?
and I just check the Routerboard.com
but I can’t find it..
“Shiro” hoped both sfp ports are directly connected to the cpu. The Tile should support this.
From Tilera’s site:
“Integrated I/O features include up to 12 ports of 1Gb Ethernet and 2 ports of 10Gb Ethernet, along with multiple PCI Express controllers that can be configured as either root complex or endpoints. An assortment of USB, RS-232, I2C and GPIO ports further consolidate the system peripherals into the TILE-Gx9 System-on-Chip (SoC).”
UPS is delivering my CCR1009-8G-1S-1S+ today (Germany), can’t wait to put that thing under load testing 
[x@mx] /interface ethernet switch port> print
Flags: I - invalid
NAME SWITCH VLAN-MODE VLAN-HEADER DEFAULT-VLAN-ID
0 ether1 switch1 disabled leave-as-is auto
1 ether2 switch1 disabled leave-as-is auto
2 ether3 switch1 disabled leave-as-is auto
3 ether4 switch1 disabled leave-as-is auto
4 switch1-cpu switch1 disabled leave-as-is auto
Hmmm... i am not sure about the 1 gig sfp port, maybe its connected to switchport and not configurable or the wiki is wrong and its directly connected to the cpu. Can someone from Microtik comment on this please?
My company already CCR1009-8G-1S-1S+ have one ready for test
I think start testing to next week..
I hope a good test
open & found 1 Phychip atheros ar8033-al1a
maby 5-8Port connection to Phy =>Tile09 ?