i received my new hap lite today, but for some reason the wireless interface does not seem to work correctly.
it looks like it keeps resetting. i am not able to connect clients to it.
here my config:
[admin@MikroTik] > /export
jun/08/2017 23:20:24 by RouterOS 6.39.2
software id = SJ36-KJ1A
/interface bridge
add admin-mac=6C:3B:6B:B8:00:61 auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether2 ] name=ether2-master
set [ find default-name=ether3 ] master-port=ether2-master
set [ find default-name=ether4 ] master-port=ether2-master
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce
disabled=no distance=indoors mode=ap-bridge ssid=MikroTik-B80064
wireless-protocol=802.11 wps-mode=disabled
/ip neighbor discovery
set ether1 discover=no
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods=“”
group-ciphers=tkip,aes-ccm mode=dynamic-keys unicast-ciphers=tkip,aes-ccm
wpa-pre-shared-key=mikrotik wpa2-pre-shared-key=mikrotik
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=dhcp disabled=no interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2-master
add bridge=bridge comment=defconf interface=wlan1
/ip address
add address=192.168.88.1/24 comment=defconf interface=ether2-master network=
192.168.88.0
/ip dhcp-client
add comment=defconf dhcp-options=hostname,clientid disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 name=router
/ip firewall filter
add action=accept chain=input comment=“defconf: accept ICMP” protocol=icmp
add action=accept chain=input comment=“defconf: accept established,related”
connection-state=established,related
add action=drop chain=input comment=“defconf: drop all from WAN” in-interface=
ether1
add action=fasttrack-connection chain=forward comment=“defconf: fasttrack”
connection-state=established,related
add action=accept chain=forward comment=“defconf: accept established,related”
connection-state=established,related
add action=drop chain=forward comment="defconf:
invalid
add action=drop chain=forward comment=
“defconf: drop all from WAN not DSTNATed”
connection-state=new in-interface=ether1
/ip firewall nat
add action=masquerade chain=srcnat comment="def
ether1
/system clock
set time-zone-name=Europe/Amsterdam
/tool mac-server
set [ find default=yes ] disabled=yes
add interface=bridge
/tool mac-server mac-winbox
set [ find default=yes ] disabled=yes
add interface=bridge
is this a defective unit?