winbox and routing

RouterOS Forwarding Protocols
1

hello …
I have problem to connect winbox with rb133c configured in bridge the interface eth1 and wlan1…

192.168.1.1/24—192.168.1.2/24–hotspot–10.5.50.1/24–10.5.50.254
–router adsl-- -|--------eth1-----rb433--------eth2---------eth1–rb133c
|
|
192.168.1.100 my pc

this is the wiring diagram of my home hotspot ..
now I with my computer I can not reach the rb133 by following the tutorial routing
help me please ..
Now to connect to rb133 I do a bridge to the two eth rb433 …
thanks to those who will give me a hand to solve the problem

thanks

2

Bypass the AP under IP > Hotspot > IP Bindings

3

thanks for the swift response ..
I tried with IP Binding but I could not …

Can you help me …
Tomorrow I have to change the rb133 because it fell and lightning struck the rb133
I will let you know if I can configure the two rb ..
I accept any suggestions ..
Thanks to all