Winbox: Could Not get Index: Fatal error

RouterOS General
1

When I try to connect to my RB500 from the public internet using the external IP of the box, it will not connect. I get the “Could not get index: Fatal error!” message.
I cannot use Winbox, SSH,FTP,Telnet, or the RB500 Website from the public internet (64.207.55.195). I can use all of these services from the internal net and internal wireless net just fine.

I have an internal net of 10.5.50.0/24 on the WLAN1 interface
I have an internal net of 192.168.4.0/24 on ETHER3
I have an internet address of 64.207.55.195/25 on ETHER1

Access to the internet works fine. I have added a NAT rule that allows me to access my server via RDP at 192.168.4.21. That works fine. I have been accessing the RB500 from the internal server at 192.168.4.21. It seems to work fine. Its just a pain in the butt to always need to log into my internal server to access the RB500.

Any ideas? Do I need to create a filter rule to allow access to the RB500 from outside?

RB532 Running RouterOS 3.10

Thanks!!

RouterOS winbox Error
Winbox: Could not fetch index from a.b.c.d (port 80): Moved
2

For the record: we ran into the same issue last week.

After physically disconneting the cable to the internet and reconnecting the problem dispeared.

We also changed the ether IP address and the port itself with no result. Curiously enough, with an invalid IP, it worked but not with a valid one.

(And before we tried to reboot but did not work).

Hope it helps.

3

I also had similar problems, but as far as I found out it is PC (windows) based not RouterOS.

4

Try to connect to webbox…

5

webbox doesn’t provide the same functionality as winbox, I suggest using PUTTY and SSH as an alternative to Winbox.

6

I face the same problem with a mikrotik rb433ah, running version 3.28

I can connect from several locations without problem. However, from a specific range (and not only a single host) i get the error “could not get index: fatal error”

What i have tried:

  • Winbox update: both version (2.2.15 and 2.2.13) fail
  • IP > Services: no ip range for winbox is defined. (0.0.0.0/0 = all). There is no change after setting to “10.0.0.0/8”
  • Reboot didnt solve the problem
  • I can telnet without problem to port 8291 , from the same same PC i cant connect using winbox.
  • deleting winbox settings didnt solve the problem

Any idea what else i can try?
Thank you

7

try from another PC, sometimes there is some problem in Windows security center, or ethernet driver.

8

I saw this post, and wanted to show how I fixed the problem.

I inherited a number of Mikrotik routers in my job, and was trying to setup a test lab. 2 of the boxes had the error, the other two did not.

I found the solution under IP → Services. You will find that all of your active services are listed, with the netblock that those services are available from. The two boxes that I was failing with were restricted to a netblock that my test lab is not a part of. Once I opened those services up to 0.0.0.0/0, I had full access again.

Anyhow, it looks like this mirrors what you’re seeing. I am not recommending opening all services wide like I did, but you should be able to at least make it function for all of the netblocks you are using.

9

Thanks for sharing yet another solution!

10

This solution didn’t work for me.

The RB is a 133C3 with RouterOS 3.28, firmware 2.18. Packages = advanced-tools, ntp, security, wireless, ppp, system and routerboard. System check-packages shows no problems. IP > services all 0.0.0.0/0 and only api is disabled.

I can Winbox into other RBs on the same network but not this one, getting the “Could not get index. Fatal error.” message. Nor can I Webbox into it. I can Telnet into the box and traceroutes and pings into the box and out of it work perfectly well.

Disturbingly the customer has been complaining that he can browse but YouTube videos won’t work on his PC. I can’t find any problems with firewalls, Flash, Java or pop-up blockers and am mystified.

11

How about set your IP Add and connect using IP .Not connect using mac … :wink:

12

Connecting via IP is the problem. I haven’t tried to connect via MAC as it’s seven hops away.

I can Winbox successfully to other boxes on the same AP and subnet so it’s not a routing problem.

13

I get the error failure to load roteos.dll over winbox. This is anever used Routerboard. Whats going on?

14

if you use windows, make sure your OS free for viruses, worm and trojan.
if you use linux, try to load winbox using wine via terminal.

15

Is there a resolution to this? I’m getting the same error, from any PC i try to connect via IP to my mikrotik. Any suggestions?One minute I could connect, the next minute I got this error.

16

did you try any of the above solutions??

17

Hi normis..,

i also have the same prob…

eather1 is connect to public ip xx.xx.xx.xx/27

and router stop responding after few hours like it runs fine around 1 or 2 hours and then its shop responding.

i am not able to connect with winbox but when i unplug the cable from eather1 which is eather1 public ip cable then it start working… is these any kind of port freezing issue…

when when we login with winbox from nat based ip to hotspot with wireless 10.2.50.xx series after login ip-routes default route is showing reachable but users didn’t get the internet.

My router is RB433AH

regards,

Birender

18

Somehow my allowed networks for winbox got set to 0.0.0.0/24 instead of 0.0.0.0/0 as I had it at the time. Not many IPs that can access it from 0.0.0.0/24 eh? I had to use the serial cable to get in and change that. I have no idea how it got changed. Probably when I was disabling services.
Thanks for the timely reply!

19

I’m Using RB433AH …
Facing the same problem, could not connect Router via winbox on remote place/IP (could not get index : fatal error) although it was connected the day before, but after searching answers I finally found what’s the problem …

  • I have to reset the ADSL router (on remote location which winbox is use) .. then it connected .. -
    I guess is some port freezeing or something …

My config :

  • ether1 is public 192.168.1.18/29

  • PPPOe interface at public has IP Private 110.xxx.67.xxx

  • Wlan using 10.10.22.1/27 for hotspot

  • Connect using winbox from remote place using IP private 110.xxx.68.xxx

Thanx guys for providing the answers !!!

20

I am also having this problem since we changed the provider Company. Actually i work for a ISP here. So the thing is that we used to have access on each place we got the AP’s but since we changed the internet provider i can’t have access to any AP. Well i can ping them i have the routes ok and nothing is changed so i don’t know how to fix this problem any1 to help here ?