Wireguard Question

RouterOS Beginner Basics
1

Hello Forum,
I’m stuck with Wireguard.
I have configured both the Router and the MS Wireguard App.
The Wireguard App manages to create the tunnel to the Router but I have a pretty strange behavior on the Windows Laptop:
1- The default gateway on the laptop isn’t set.(0.0.0.0)
2- The subnetmask is wrong: 255.255.255.255

When I’m querying the DNS via nslookup to the Wireguard Router IF, this doesn’t give me any name.
But I can ping the Router Wireguard IF.

I have followed both NetworkBerg and Mikrotik videos which are pretty clear I understand.

I would truly appreciate some help as I’m really stuck.
Thanks
Laurent

2

Where did you get the MS wireguard app from??

Check firewalls or AV on windows laptop.

3

I have it working here and see how the configuration is on my Windows.
wireguard.png

4

This is even wierder. That works well on my mac but not on the PC Windows…

5

Hi guys,
thanks for your input.
Likely be a Windows Firewall or AV issue..
I’ll try to dig out.
Thanks
Laurent

6

Hi Leoservices, is your endpoint your public IP on Windows ?
Thanks
Laurent

7

Endpoint is the Public IP of the MikroTik router and the port on which the wireguard interface is located.

8

Typically people use a DYNDNS name/url associated with the public IP of their network. It could be you are behind an ISP router etc…
A free one available is your IP Cloud on the router ( my netname )

So for endpoint and port you put into the client device peer settings

Endpoint = 4g5c933264sw.sn.mynetname.ne:13231

9

Be advised it seems there is a generic problem with mynetname.net service.

http://forum.mikrotik.com/t/mynetname-net-dns-down/172180/24

10

Leo was spot on.
The only issue is my business computer set of apps.
It works well on my iphone and on my personal MAC.

The weird thing is that I don’t have the same issue with openvpn which itself works pretty well.