We are trying to bridge three locations together using Mikrotik and 2.9.13
and 2.9.14. One end has a client setup talking to an AP on the tower
using station-wds. Connecting from the tower to the client works fine.
The AP side has two radios both running as APs and bridged together. The
second AP is connected to the second client running station-wds. We can
manage the radio at the second client site but we are unable to ping the
device connected to the ethernet side.
If an IP address is set that conflicts with an address at client 1, it
throws an error but no pings get through.
Any ideas?