Wireless issue after upgrading to 6.41.3

RouterOS Wireless Networking
1

HI,

After Upgrading my CPE to 6.41.3 I’m experiencing Wlan issue

Clients tend to disconnect after 5 to 10 minutes, and some CPE seems to be no longer able to connect. Ap shows message: disconnected received deauth: sending station leaving (3)

This is happening with almost all CPE i have upgraded, everything worked fine just before upgrading.

I have tried to Upgrade also some of my AP to 6.41.3, but did not fix the problem.

PtMP application with mostly mikrotik CPE and some Ubiquiti stuff that works fine.

anyone having the same issue?

2

If you downgrade to 6.41.2 your problems are gone?

Please write an e-mail to support@mikrotik.com so they can take a look at this issue.

3

Can confirm, I have the same issue.
Downgrading solves it.

4

Hi,

no, it does not work for me.

I have discovered that the combination of Roaming and connect-list process is a nightmare.

I have solved the disconnection issue by disabling roaming in the CPE.

About the CPE that do not connect anymore:

Now CPE is looking for the connect-list, and as written in the manual if unable to find any valid AP (according to connect-list), it tries to connect to the strongest AP’S it can detect.
Unlucky the CPE tries to connect just to some of the strongest and seems to ignore some of the other even if the AP has the correct ssid and is in access-list.

The result is that now CPE that where linked to some of my AP are no longer able to connect to them. But only to the AP that the CPE wants to connect to.

I would be very happy if I can disable the connect-list process. I have already ssid and access-list, and i do not have needs to lock CPE to AP.

No idea if this process was active in the past, but now it must work in a different way somehow.

Do anyone knows if The connect-list process can be disabled?