I have the following link :
Can I get more bandwith from A to C with some tweaking ? or some different configurations ?
I was hopping for more from this link.
A : Station
B : Ap Bridge, Station
C: Ap Bridge (wlan1 ip 10.1.1.1 
)
Tests made with Tcp one direction
Try 5Ghz Turbo mode you get more bandwitch also enable polling.
16km 2,4Ghz-turbo nstreme polling signal -70, 50Mbps bandwitch TCP test one direction.
Best regards…
Done this. Now my speed in tests from A-C is 24-26 Mbps and real traffic is max 30 Mbps. Not bad 
but can I get more from this link ?
There is also a small problem. Changing frequency to 5Ghz-turbo seems to afect my ping time. Before was 2-10 ms and now is more fluctuation 2-45, is this normal ?
Its probably changing data rates more often as the wider channel has a weaker signal and is more prone to interference as well. Every time it changes from speed your latency will go up for a brief moment. What is your signal level, what is your data rate on the status page?
-58
-64 depends on the weather
forced to 48/54
another question … How do I assign to B a public ip, i’ve managed to do that to A and C but B makes me go crazy 
Changed A and B with P3 866 Mhz. Not bad at all
