Wireless Product recommendation, small distance, low latency ?

Hardware MikroTik hardware general
1

Hello,
i want to connect two Buildings via 5GHz P2P, Distance ~80m, Wireless Stations would be mount outside the Building A and inside the Building B behind the outside Wall.

I looking for a solution with lowest Latency, Bandwidth is secondary but should min. real 10MBit.

I plan to use the SXT 5 lite. But I’m not sure because one Station will be behind the Wall and the distance is very small ?

Any recommendations / comment’s ?

Thanks,
regards
Marcus

2

With brick or wooden wall it would work most probably. You can try also 2.4g version of sxt that could perform better through the walls.

3

Many thanks for your response.

I will give the SXT5 a try, because the 2.4GHz is heavy used in the hood.

Did you expect some problems because the distance is to near, i have read that this could be a problem for station who are designed to bridge km’s ?

Regards
Marcus

4

It depends on the signal, but the wall will lower the signal. There is no problem if you adjust the power levels.

5

Many thanks for you answers, i will order the SXT 5 lite.

Cheers
Marcus

6

An additional question came up :slight_smile:

http://forum.mikrotik.com/t/optimize-wlan-bridge-as-low-latency-connection-for-dsl-bonding/88909/1