I have a link using a wireless wire dish with the factory parameters and it shows my link at RSSI -54 Signal at 95 PHY rate 2.3 Gbps on Slave end and RSSI -55 Signal 90 PHY rate 2.3 Gbps on the Master end. I have 960 MB of internet piped into it through the Master end but at the Slave end it is only received around 200 MB. How can I resolve this? The link it steady. Its running at 1000 feet from each other. I ran a speedtest using speedtest.net I do not know how to use the Mikrotik Bandwidth Test v0.1 and would need help with how to use that if that is a method that is needed to determine the problem.