Wrong Bandwidth

RouterOS Wireless Networking
1

I have a problem and do not understand is happening.
The diagram is:
Router <— Cable → PTP_Master <---- waves/not cable ----> PTP_Slave <— Cable —> Omnitik AP <— waves/not cable —> SXT Access point

Bandwithd between Router and PTP_Master is 100Mbps (Sended from router to destination)
Bandwithd between Router and PTP_Slave is 95Mbps
Bandwithd between PTP_MASTER and PTP_Slave is 95Mbps
Bandwithd between Router and Omnitik AP is 95Mbps
Bandwithd between Omnitik AP and SXT is 150Mbps

Bandwithd beteween Router or PTPMaster and the SXT is only 35Mbps! :frowning:
Why? all rates are 90/60Mbps separately, but in global only 35Mbps
I don’t understand…

2

I think you are watching that all your wireless devices are connected at 90/60mbps wireless rate and expect that to be real throughput and expect to have that between your end points. But there is a difference between wireless rate and real throughput.
Make a throughput test at every wireless link to see where you have lower real bandwidth and fix there.

3

Hi,
I use the “Tools->Bandwidth Test” between devices for the values I give in the first post.
Is not valid this test/tool?

I use “station bridge”, not WDS, may be due to some problem of routing or protocol?
Thanks