Community discussions

MikroTik App
  4. RouterOS
  5. RouterOS beta

Feature request: HSGMII for SFP >1Gbps synchronization.  [SOLVED]

Post Reply
 
User avatar
Gnubyte
just joined
Topic Author
Posts: 21
Joined: Sat Aug 15, 2020 7:31 pm
Location: Toulon - France

Feature request: HSGMII for SFP >1Gbps synchronization.

Wed Sep 09, 2020 1:39 pm

I submit to the sagacity of the hardware and software developers of v7 firmware the opportunity to manage the HSGMII extensions allowing the synchronization of certain SFP interfaces at speeds> 1Gbps.

For example 2.5Gbps on SFP, for a lot of references, like in https://www.dslreports.com/forum/r32458588

It would be greatly appreciated.

Thanks for your great stuff.
Last edited by Gnubyte on Sat Apr 16, 2022 2:03 am, edited 3 times in total.
Top
 
Florian
Member Candidate
Member Candidate
Posts: 122
Joined: Sun Mar 13, 2016 9:45 am
Location: France

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Wed Nov 11, 2020 2:02 pm

Up !

Would be great indeed !
Top
 
quentin9696
just joined
Posts: 9
Joined: Tue Nov 17, 2020 11:32 pm

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Sun Nov 22, 2020 11:47 am

I agree.

I really need this feature too, and I'm stuck with my SFP on the Mikrotik CCR2004
Top
 
User avatar
stevebrush
just joined
Posts: 1
Joined: Wed Dec 16, 2020 9:22 am

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Thu Dec 17, 2020 10:50 pm

Yes please :
It will make mikrotik routers/switchs a very valuable good alternative to ISP all-in-one boxes in France.
HSGMII extensions for gpon modules at 2,5 Gbps would allow us to use our fiber offer at its full potential : 2Gbps down / 600Mbps up
Some concurrent hardware already support it but I personally prefer your brand.
Top
 
Florian
Member Candidate
Member Candidate
Posts: 122
Joined: Sun Mar 13, 2016 9:45 am
Location: France

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Mon Feb 08, 2021 6:12 pm

Any news ? Is it possible for a futur v7 version, at least for hardware with 10gb ports ?

Thx.
Top
 
shavenne
just joined
Posts: 17
Joined: Wed Dec 11, 2019 4:27 pm

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Mon May 24, 2021 4:42 am

I also would like to see this.

+1
Top
 
Florian
Member Candidate
Member Candidate
Posts: 122
Joined: Sun Mar 13, 2016 9:45 am
Location: France

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Sun Oct 03, 2021 8:21 pm

Up !
Top
 
akagami
just joined
Posts: 1
Joined: Wed Nov 10, 2021 1:08 pm

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Wed Nov 10, 2021 1:11 pm

This would be really great on the RB5009
+1
Top
 
mobyfab
just joined
Posts: 6
Joined: Tue Jul 03, 2018 4:45 pm
Location: France

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Thu Dec 30, 2021 9:05 pm

+1
It's not a hardware limitation on current line of devices (CCR2*** routers, CRS*** switches) as both can support HSGMII according to cpu datasheets.

This would make these devices the easiest replacement for European ISP routers.
Top
 
jpost
just joined
Posts: 1
Joined: Sat Jan 01, 2022 12:37 am

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Sat Jan 01, 2022 12:38 am

+1

Required for Nokia GPON SFP with 2.5 HSGMII
Top
 
mikronerd
just joined
Posts: 3
Joined: Tue Feb 09, 2021 6:59 pm

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Sat Jan 29, 2022 8:49 am

Big +1 for this. especially with new ROS v7!
Top
 
User avatar
Gnubyte
just joined
Topic Author
Posts: 21
Joined: Sat Aug 15, 2020 7:31 pm
Location: Toulon - France

Re: Feature request: HSGMII for SFP >1Gbps synchronization.  [SOLVED]

Sat Apr 16, 2022 1:59 am

I submit to the sagacity of the hardware and software developers of v7 firmware the opportunity to manage the HSGMII extensions allowing the synchronization of certain SFP interfaces at speeds> 1Gbps.

For example 2.5Gbps on SFP, for a lot of references, like in https://www.dslreports.com/forum/r32458588

It would be greatly appreciated.

Thanks for your great stuff.
Today, on a CCR2004-1G-12S+-2XS on RouterOs v7.3beta33, it is possible to sync Lantiq chipset ONU SFP at 2.5Gbps in CLI mode doing:
Code: Select all
/interface/ethernet
set auto-negotiation=no etherNumber
set speed=2.5Gbps etherNumber
Then disable dhcp client, disable interface, enable it again, wait for some trafic, enable dhcp client.

Many thanks Mikrotik Devs for this killing feature highly needed in France.
Top
 
Mackila
just joined
Posts: 3
Joined: Fri Oct 01, 2021 9:45 pm

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Sat Apr 16, 2022 12:12 pm

Thanks Mikrotik !

Too bad I got a CCR2004 16G 2S+, the 2 SFP+ beeing wired direct on the CPU...

I'll try it with the CRS305 :)
Top
 
Florian
Member Candidate
Member Candidate
Posts: 122
Joined: Sun Mar 13, 2016 9:45 am
Location: France

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Sat Apr 16, 2022 12:19 pm

Thanks Mikrotik !

Too bad I got a CCR2004 16G 2S+, the 2 SFP+ beeing wired direct on the CPU...

I'll try it with the CRS305 :)
I don't get why they can't add the support by the cpu. The switch asic is more "compatible" than the one into the cpu ? idk....
Top
 
felixka
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Mon Oct 19, 2020 4:12 am
Location: Canada

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Sun Apr 17, 2022 6:01 am

I don't get why they can't add the support by the cpu. The switch asic is more "compatible" than the one into the cpu ? idk....
Comes down to the Linux driver support. Most don't have 2500Base-X support, even though the chip may support it. So either Mikrotik goes ahead and implements that part themselves or waits for the Kernel to gain this support from the OEM. On Switch chips it may be easier as the switch chip can handle it directly while being connected to the CPU through a different, supported link mode.
Top
 
shavenne
just joined
Posts: 17
Joined: Wed Dec 11, 2019 4:27 pm

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Mon Apr 25, 2022 9:52 pm

I can confirm it's working on CRS309-1G-8S+ and CRS328-24P-4S+
Tried that with a Huawei MA5671A GPON-ONU.
Top
 
mobyfab
just joined
Posts: 6
Joined: Tue Jul 03, 2018 4:45 pm
Location: France

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Tue Apr 26, 2022 10:52 pm

Seems to sync OK at 2.5Gbps on a CRS317. (GPON ONU from FS.com)
However since switch rules are broken and bridge filters are ignored, I can't make it work.
Top
 
olivier2831
Member
Member
Posts: 310
Joined: Fri Sep 08, 2017 6:53 pm

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Wed Apr 27, 2022 8:52 am

Does any 2.5Gb/s Ethernet interface support HSGMII or vice versa or both ?
In other words, beside 2.5Gb/s speed, what does an Ethernet interface need to support to fully implement HSGMII ?
Top
 
Florian
Member Candidate
Member Candidate
Posts: 122
Joined: Sun Mar 13, 2016 9:45 am
Location: France

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Sat May 07, 2022 7:40 pm

Does any 2.5Gb/s Ethernet interface support HSGMII or vice versa or both ?
In other words, beside 2.5Gb/s speed, what does an Ethernet interface need to support to fully implement HSGMII ?
Nope, it has to be 2.5g+HSGMII compatible. A lot of 2.5g interfaces are not HSGMII compatible.
Top
 
nereith
just joined
Posts: 6
Joined: Sat Dec 15, 2018 6:32 am

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Sun May 08, 2022 4:57 am

I can confirm it's working on CRS309-1G-8S+ and CRS328-24P-4S+
Tried that with a Huawei MA5671A GPON-ONU.
Are you seeing the 2.5Gbps speed option on the SFP+ port when you disable auto negotiation?

I upgraded the CRS309 to 7.3beta37, and 2.5Gbps option isn't available.
You do not have the required permissions to view the files attached to this post.
Top
 
mducharme
Trainer
Trainer
Posts: 1777
Joined: Tue Jul 19, 2016 6:45 pm
Location: Vancouver, BC, Canada

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Sun May 08, 2022 5:35 am

Are you seeing the 2.5Gbps speed option on the SFP+ port when you disable auto negotiation?

I upgraded the CRS309 to 7.3beta37, and 2.5Gbps option isn't available.
As it says in the changelog, it is only available from the CLI at the moment, not Winbox.
Top
 
olivier2831
Member
Member
Posts: 310
Joined: Fri Sep 08, 2017 6:53 pm

Re: [SOLVED !!!] Feature request: HSGMII for SFP >1Gbps synchronization.

Mon May 09, 2022 10:00 am

Does any 2.5Gb/s Ethernet interface support HSGMII or vice versa or both ?
In other words, beside 2.5Gb/s speed, what does an Ethernet interface need to support to fully implement HSGMII ?
Nope, it has to be 2.5g+HSGMII compatible. A lot of 2.5g interfaces are not HSGMII compatible.
@Florian:
Thanks for replying !
In many instances, I've HSGMII and 2.5Gb/s being used as if they meant exactly the same !
Top
 
Florian
Member Candidate
Member Candidate
Posts: 122
Joined: Sun Mar 13, 2016 9:45 am
Location: France

Re: Feature request: HSGMII for SFP >1Gbps synchronization.

Wed Sep 21, 2022 11:00 am

Any news on HSGMII support on device without switch chip, like some tilera CCR ?
Top
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests
  4. RouterOS
  5. RouterOS beta