Community discussions

MikroTik App
 
User avatar
IPANetEngineer
Trainer
Trainer
Topic Author
Posts: 1404
Joined: Fri Aug 10, 2012 6:46 am
Location: Jackson, MS, USA
Contact:

Segment Routing and IS-IS

Fri Jan 01, 2021 7:01 pm

Kicking off the new year to reiterate my MikroTik wish list....while there are many things i'd love to see in ROSv7, these are my top 2.

1) Segment Routing - In the service provider and data center space, MPLS is rapidly moving over to SR-MPLS because it simplifies both label exchange and traffic engineering considerably. When using traditional MPLS signaling, LDP and RSVP are required along with the IGP. SR-MPLS combines all of those functions into the IGP. Traffic engineering capabilities are fantastic because the source of traffic can be used in the policy decision and you no longer have to maintain state throughout the entire path as is the case with RSVP-TE.

2) IS-IS - I think IS-IS is one of the smartest choices that MIkroTik could make as a routing protocol addition. Having worked on MikroTik networks for more than 10 years, i've seen scaling issues with OSPF. IS-IS even in other vendor networks has less overhead and would pair well with the low-power and low-cost processors that MikroTik uses in routers and switches. It also operates at Layer 2 which makes it easy to transport IPv4 or IPv6 using the same process and is much harder to attack since there is no L3 required for adjacency/neighbor to form.

Both of these protocols pair well together as SR-MPLS is an extension of the IGP. I think we would see significant adoption by DC and SP operators of MikroTik devices (as opposed to Cisco/Juniper) if these two protocols were added to ROSv7.
Global - MikroTik Support & Consulting - English | Español | Serbian | Danish +1 855-645-7684
https://iparchitechs.com/ecosystem/mikr ... consulting mikrotiksupport@iparchitechs.com
 
anuser
Long time Member
Long time Member
Posts: 549
Joined: Sat Nov 29, 2014 7:27 pm

Re: Segment Routing and IS-IS

Fri Jan 01, 2021 7:55 pm

For full inexpensive IS-IS support, take a look at H3C or Huawei switches.
 
zbiles
just joined
Posts: 1
Joined: Wed Mar 20, 2019 11:48 pm

Re: Segment Routing and IS-IS

Sun Jan 03, 2021 7:21 pm

+1, this would be extremely useful in the wisp industry. At least to me it's much simpler to understand than MPLS, so would lower the barrier to entry for wisps to build proper routed networks.
 
chipper43
just joined
Posts: 9
Joined: Wed Apr 24, 2013 5:08 am

Re: Segment Routing and IS-IS

Sun Jan 03, 2021 7:32 pm

+1 Solid carrier grade move.
 
brytonh
just joined
Posts: 1
Joined: Wed Aug 14, 2019 4:08 pm

Re: Segment Routing and IS-IS

Sun Jan 03, 2021 8:21 pm

Yes please!

both protocols would help tremendously with inter-op applications for network operators.
 
networkfudge
Trainer
Trainer
Posts: 134
Joined: Mon May 20, 2013 2:47 pm

Re: Segment Routing and IS-IS

Sun Jan 03, 2021 9:24 pm

+1 for SR-MPLS & IS-IS support in v7.
MTCNA MTCWE MTCRE MTCINE MTCTCE UWBS UWBA
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 1919
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: Segment Routing and IS-IS

Mon Jan 04, 2021 3:15 am

+1

I support this as well.

I have asked in the past and was told IS-IS was not on the roadmap due to lack of demand. Hopefully this thread can show Mikrotik how much demand is really out there.
http://thebrotherswisp.com/ | Mikrotik MTCNA, MTCRE, MTCINE | Fortinet NSE7 | Extreme Networks ENA
 
slvfibergarrett
just joined
Posts: 2
Joined: Mon Jan 04, 2021 7:24 am

Re: Segment Routing and IS-IS

Mon Jan 04, 2021 7:27 am

+1. Segment Routing and IS-IS would be killer.
 
mducharme
Trainer
Trainer
Posts: 1345
Joined: Tue Jul 19, 2016 6:45 pm

Re: Segment Routing and IS-IS

Mon Jan 04, 2021 8:46 am

+1

However, I also do want to see RouterOS v7 stabilized. I would be thrilled if we could move our core BGP routers to ROS 7 in a years time or so. We need working MPLS first for that, and for the existing routing stack to have stabilized enough.
 
SeanTrusc
just joined
Posts: 1
Joined: Sat Apr 07, 2018 4:17 pm

Re: Segment Routing and IS-IS

Mon Jan 04, 2021 10:02 am

+1

Both these protocols would help our network scalability tremendously
 
Michaelcrapse
newbie
Posts: 26
Joined: Wed Oct 25, 2017 9:57 pm

Re: Segment Routing and IS-IS

Tue Jan 05, 2021 7:00 pm

As a service provider with 500+mikortik routers in the network, we would love to have IS-IS for scalability
 
dalr
just joined
Posts: 1
Joined: Sun Dec 27, 2020 12:42 pm

Re: Segment Routing and IS-IS

Tue Jan 05, 2021 8:28 pm

+1 for both segment routing and IS-IS.
 
User avatar
hknet
Member Candidate
Member Candidate
Posts: 114
Joined: Sun Jul 17, 2016 6:05 pm
Location: Vienna, Austria
Contact:

Re: Segment Routing and IS-IS

Fri Jan 15, 2021 1:54 am

+1 on IS-IS and segmented routing - pleeease :)
 
mafiosa
Member Candidate
Member Candidate
Posts: 145
Joined: Fri Dec 09, 2016 8:10 pm

Re: Segment Routing and IS-IS

Fri Jan 15, 2021 12:42 pm

+1 for IS-IS and segment routing.
 
JJT211
newbie
Posts: 39
Joined: Sun Apr 28, 2019 9:01 pm

Re: Segment Routing and IS-IS

Tue Mar 09, 2021 6:20 am

++1
 
mafiosa
Member Candidate
Member Candidate
Posts: 145
Joined: Fri Dec 09, 2016 8:10 pm

Re: Segment Routing and IS-IS

Tue Mar 09, 2021 11:06 am

+1 for IS-IS
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 548
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: Segment Routing and IS-IS

Mon Mar 29, 2021 11:49 pm

+2 (both)
 
mada3k
Member
Member
Posts: 386
Joined: Mon Jul 13, 2015 10:53 am
Location: Sweden

Re: Segment Routing and IS-IS

Fri Apr 16, 2021 9:34 pm

IS-IS and SR would indeed be a big step forward
CCR/CRS/hEX/wAP • Ansible • NetXMS
 
brotherdust
Member Candidate
Member Candidate
Posts: 117
Joined: Tue Jun 05, 2007 1:31 am

Re: Segment Routing and IS-IS

Wed May 05, 2021 9:43 pm

I’ve said this so many times that I think I’m starting to go crazy. 😁 I would really prefer RouterOS 7 just use FRR for its routing engine; that way they get all the nice features we want, such as IS-IS and SR “for free”. Hopefully the rest of the community realizes this and pushes for it before it’s too late.

Who is online

Users browsing this forum: No registered users and 8 guests