Community discussions

MUM Europe 2020
 
UMarcus
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Wed Jan 21, 2015 10:11 am
Location: Europe

Feature Request : L2TP Connection / Packet Mark

Fri Sep 04, 2015 1:29 pm

Please add functionality to enter Connection or Packet Mark in L2TP Client Profiles, because currently there is no way to Mangle different L2TP Client connections ('Dial Out Routing').

Thanks,
regards
Marcus
 
UMarcus
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Wed Jan 21, 2015 10:11 am
Location: Europe

Re: Feature Request : L2TP Connection / Packet Mark

Mon Dec 07, 2015 12:30 pm

Any comments on that ?
 
mavink
newbie
Posts: 32
Joined: Sun Sep 06, 2015 5:55 pm

Re: Feature Request : L2TP Connection / Packet Mark

Thu Dec 17, 2015 3:41 pm

Please add functionality to enter Connection or Packet Mark in L2TP Client Profiles, because currently there is no way to Mangle different L2TP Client connections ('Dial Out Routing').

Thanks,
regards
Marcus
Have you tried assigning a different address pool to each client profile, and doing the mangling based on the IP address?
 
UMarcus
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 91
Joined: Wed Jan 21, 2015 10:11 am
Location: Europe

Re: Feature Request : L2TP Connection / Packet Mark

Thu Dec 17, 2015 4:33 pm

Please add functionality to enter Connection or Packet Mark in L2TP Client Profiles, because currently there is no way to Mangle different L2TP Client connections ('Dial Out Routing').

Thanks,
regards
Marcus
Have you tried assigning a different address pool to each client profile, and doing the mangling based on the IP address?
Thanks for you answer.

At that moment my L2TP client going to 'Dial Out' i have no IP Pool Information.

My problem is i need to mangle and route 4 L2TP Client, only difference the user name is, to 4 different dynamic ISP WAN ports. I use that to bind 4 DSL Connections. Currently i need 4 Mikrotik Router to do that, each per L2TP Tunnel :shock:
 
mavink
newbie
Posts: 32
Joined: Sun Sep 06, 2015 5:55 pm

Re: Feature Request : L2TP Connection / Packet Mark

Thu Dec 17, 2015 8:44 pm

Please add functionality to enter Connection or Packet Mark in L2TP Client Profiles, because currently there is no way to Mangle different L2TP Client connections ('Dial Out Routing').

Thanks,
regards
Marcus
Have you tried assigning a different address pool to each client profile, and doing the mangling based on the IP address?
Thanks for you answer.

At that moment my L2TP client going to 'Dial Out' i have no IP Pool Information.

My problem is i need to mangle and route 4 L2TP Client, only difference the user name is, to 4 different dynamic ISP WAN ports. I use that to bind 4 DSL Connections. Currently i need 4 Mikrotik Router to do that, each per L2TP Tunnel :shock:
So these are connections that dial out from your router, instead of inbound connections?

Who is online

Users browsing this forum: erlinden, gkk, rioven and 107 guests