6.41rc +ZTE ME3630 + GPS
Posted: Tue Oct 10, 2017 5:24 pm
Hello
Internet with ZTE LTE module ME3630 is working fine on a RB912 with 6.41cr38.
Now i'm trying to make the GPS work.
After plugging the passive GPS antenna and setiing the following Init commands
i get the following output
So the GPS part seems to work.
Then I installed the GPS package , rebooted, enabled etc.. but the /system gps monitor command stays silent, no data is displayed. I think that the GPS package can't parse ZTE GPS output, will this be fixed on the 6.41 release or am I going the wrong way?
Internet with ZTE LTE module ME3630 is working fine on a RB912 with 6.41cr38.
Now i'm trying to make the GPS work.
After plugging the passive GPS antenna and setiing the following Init commands
Code: Select all
AT+ZGINIT // init GPS
AT+ZGPSR=1 // enable positioning
AT+ZFIXRATE=5,5 // set 5-measures row at 5 secs interval
AT+ZGRUN=2 // run the GPS
Code: Select all
+ZGPSR: 140307.000,4848.8734N,00227.5253E,1.8,100.7,2,197.42,0.0,0.0,101017,19
+ZGPSR: 140312.000,4848.8734N,00227.5253E,1.8,100.7,2,197.42,0.0,0.0,101017,19
+ZGPSR: 140316.000,4848.8734N,00227.5253E,1.8,100.7,2,197.42,0.0,0.0,101017,19
+ZGPSR: 140320.000,4848.8734N,00227.5253E,1.8,100.8,2,197.42,0.0,0.0,101017,20
+ZGPSR: 140323.000,4848.8734N,00227.5253E,1.8,100.8,2,197.42,0.0,0.0,101017,19
Then I installed the GPS package , rebooted, enabled etc.. but the /system gps monitor command stays silent, no data is displayed. I think that the GPS package can't parse ZTE GPS output, will this be fixed on the 6.41 release or am I going the wrong way?