Community discussions

 
User avatar
floaty
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 50
Joined: Sat Oct 20, 2018 1:24 am
Location: 52°08'32.34"N 14°39'05.0"E

adding fib to vrf failed with timeout

Thu Oct 03, 2019 6:56 pm

Version number
7.0beta2

Router's model
model: RouterBOARD 3011UiAS
firmware-type: ipq8060
factory-firmware: 6.42.12
current-firmware: 7.0beta2
upgrade-firmware: 7.0beta2

Steps to reproduce the issue
[admin@RB3011] > ip vrf add name=vrf10 
[admin@RB3011] > ip vrf add name=vrf20 
[admin@RB3011] > ip vrf add name=vrf30
[admin@RB3011] > 
[admin@RB3011] > 
[admin@RB3011] > routing table print
Flags: D - dynamic; X - disabled, I - invalid; U - used 
[admin@RB3011] > 
[admin@RB3011] > 
[admin@RB3011] > /routing table add fib name=main-fib vrf=main
[admin@RB3011] > /routing table print                         
Flags: D - dynamic; X - disabled, I - invalid; U - used 
 0     name="main-fib" vrf=main fib 
[admin@RB3011] > 
[admin@RB3011] > /routing table add fib name=v10-fib vrf=vrf10   
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
[admin@RB3011] >
.

Configuration export (use '/export hide-sensitive' command)
[attached]

Any additional information that would help troubleshoot the issue (screenshots, debug logs, etc.).
[admin@RB3011] > system/sup-output name=v7-vrf-fib
created: 100%
[attached]
You do not have the required permissions to view the files attached to this post.
~~
We know what happens to people who stay in the middle of the road. They get run over.
 
User avatar
floaty
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 50
Joined: Sat Oct 20, 2018 1:24 am
Location: 52°08'32.34"N 14°39'05.0"E

Re: adding fib to vrf failed with timeout

Thu Oct 03, 2019 7:10 pm

Version number
7.0beta2

Router's model
CHR
.
[admin@CHRv7] > ip vrf add name=vrf10
[admin@CHRv7] > /routing table add fib name=main-fib vrf=main
[admin@CHRv7] > 
[admin@CHRv7] > /routing table print   
Flags: D - dynamic; X - disabled, I - invalid; U - used 
 0     name="main-fib" vrf=main fib 
[admin@CHRv7] > 
[admin@CHRv7] > /routing table add fib name=v10-fib vrf=vrf10
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
[admin@CHRv7] >
.
You do not have the required permissions to view the files attached to this post.
~~
We know what happens to people who stay in the middle of the road. They get run over.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5942
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: adding fib to vrf failed with timeout

Fri Oct 04, 2019 11:51 am

Thank you for the report, at this moment VRFs are not implemented. Adding table to the vrf will simply crash the route.
 
User avatar
floaty
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 50
Joined: Sat Oct 20, 2018 1:24 am
Location: 52°08'32.34"N 14°39'05.0"E

Re: adding fib to vrf failed with timeout

Sat Oct 05, 2019 1:05 am

uuh ... yeah ... tried to push an interface into a VRF ... failed ... pushed harder ... saw the error-message ...
... maybe a little "what's-worth-to-test-and-what's-not-implemented-yet-v7-matrix" could be helpfull in the notes ... to avoid 'early redundancy'
... anyway: thumbs-up !
~~
We know what happens to people who stay in the middle of the road. They get run over.

Who is online

Users browsing this forum: No registered users and 8 guests