Page 1 of 1

adding fib to vrf failed with timeout

Posted: Thu Oct 03, 2019 6:56 pm
by floaty
Version number
7.0beta2

Router's model
model: RouterBOARD 3011UiAS
firmware-type: ipq8060
factory-firmware: 6.42.12
current-firmware: 7.0beta2
upgrade-firmware: 7.0beta2

Steps to reproduce the issue
[admin@RB3011] > ip vrf add name=vrf10 
[admin@RB3011] > ip vrf add name=vrf20 
[admin@RB3011] > ip vrf add name=vrf30
[admin@RB3011] > 
[admin@RB3011] > 
[admin@RB3011] > routing table print
Flags: D - dynamic; X - disabled, I - invalid; U - used 
[admin@RB3011] > 
[admin@RB3011] > 
[admin@RB3011] > /routing table add fib name=main-fib vrf=main
[admin@RB3011] > /routing table print                         
Flags: D - dynamic; X - disabled, I - invalid; U - used 
 0     name="main-fib" vrf=main fib 
[admin@RB3011] > 
[admin@RB3011] > /routing table add fib name=v10-fib vrf=vrf10   
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
[admin@RB3011] >
.

Configuration export (use '/export hide-sensitive' command)
[attached]

Any additional information that would help troubleshoot the issue (screenshots, debug logs, etc.).
[admin@RB3011] > system/sup-output name=v7-vrf-fib
created: 100%
[attached]

Re: adding fib to vrf failed with timeout

Posted: Thu Oct 03, 2019 7:10 pm
by floaty
Version number
7.0beta2

Router's model
CHR
.
[admin@CHRv7] > ip vrf add name=vrf10
[admin@CHRv7] > /routing table add fib name=main-fib vrf=main
[admin@CHRv7] > 
[admin@CHRv7] > /routing table print   
Flags: D - dynamic; X - disabled, I - invalid; U - used 
 0     name="main-fib" vrf=main fib 
[admin@CHRv7] > 
[admin@CHRv7] > /routing table add fib name=v10-fib vrf=vrf10
action timed out - try again, if error continues contact MikroTik support and send a supout file (13)
[admin@CHRv7] >
.

Re: adding fib to vrf failed with timeout

Posted: Fri Oct 04, 2019 11:51 am
by mrz
Thank you for the report, at this moment VRFs are not implemented. Adding table to the vrf will simply crash the route.

Re: adding fib to vrf failed with timeout

Posted: Sat Oct 05, 2019 1:05 am
by floaty
uuh ... yeah ... tried to push an interface into a VRF ... failed ... pushed harder ... saw the error-message ...
... maybe a little "what's-worth-to-test-and-what's-not-implemented-yet-v7-matrix" could be helpfull in the notes ... to avoid 'early redundancy'
... anyway: thumbs-up !