Community discussions

MUM Europe 2020
 
woqup5s0wf
just joined
Topic Author
Posts: 4
Joined: Tue Nov 12, 2019 3:50 pm

[ROS 7.0b3] 64-bit support on x86

Wed Nov 13, 2019 8:36 pm

Dear Mikrotik team,

it seems you have enabled 64-bit support on the x86 platform. The command /system/hardware/print shows:
multi-cpu: yes
allow-x86-64: no
If you enable 64-bit support and reboot it correctly enables it, see the memory:
                   uptime: 2m20s
                  version: 7.0beta3 (development)
               build-time: Oct/22/2019 09:34:17
              free-memory: 3860.7MiB
             total-memory: 3904.0MiB
                      cpu: Intel(R)
                cpu-count: 2
            cpu-frequency: 1166MHz
                 cpu-load: 0%
           free-hdd-space: 110.8GiB
          total-hdd-space: 110.8GiB
  write-sect-since-reboot: 424
         write-sect-total: 424
        architecture-name: x86_64
               board-name: x86
                 platform: MikroTik
But if you do that the wireless support gets disabled, so I guess it isn't actually supported. Here you said it shouldn't be possible to enable it on the x86 platform.

Thanks!
 
PCT2015
just joined
Posts: 6
Joined: Mon Jan 18, 2016 7:57 am

Re: [ROS 7.0b3] 64-bit support on x86

Sat Nov 30, 2019 4:25 pm

Dear Mikrotik team,

it seems you have enabled 64-bit support on the x86 platform. The command /system/hardware/print shows:
multi-cpu: yes
allow-x86-64: no
If you enable 64-bit support and reboot it correctly enables it, see the memory:
                   uptime: 2m20s
                  version: 7.0beta3 (development)
               build-time: Oct/22/2019 09:34:17
              free-memory: 3860.7MiB
             total-memory: 3904.0MiB
                      cpu: Intel(R)
                cpu-count: 2
            cpu-frequency: 1166MHz
                 cpu-load: 0%
           free-hdd-space: 110.8GiB
          total-hdd-space: 110.8GiB
  write-sect-since-reboot: 424
         write-sect-total: 424
        architecture-name: x86_64
               board-name: x86
                 platform: MikroTik
But if you do that the wireless support gets disabled, so I guess it isn't actually supported. Here you said it shouldn't be possible to enable it on the x86 platform.

Thanks!
Here is me screen for x86 whit activate 64 bits
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 5 guests