When LTE connection is set up, I initially see that the router aggregates 3 bands across the available ones : B1,B3,B7
After some time it goes into 2CA mode and it never reverts back to 3CA unless I close and reopen the LTE connection (disable/enable).
Is this a known issue? I understand that B7 is very weak signal, but when it uses it, it actually works fine and gives me 20 mbit/s more....
Thanks
Rick
Code: Select all
primary-band: B1@10Mhz earfcn: 150 phy-cellid: 81
ca-band: B3@20Mhz earfcn: 1650 phy-cellid: 81
Columns: PHY-CELLID, BAND, EARFCN, RSRP, RSRQ, RSSI, AGE
PHY BA EARF RSRP RSRQ RSSI AG
81 B1 150 -95dBm -9dB -69dBm 2s
81 B3 1650 -94dBm -12dB -72dBm 2s
273 B7 3350 -117dBm -15dB -93dBm 2s
280 B7 3350 -111dBm -11dB -91dBm 2s
399 B1 150 -106dBm -20dB -72dBm 2s
399 B3 1650 -104dBm -19dB -75dBm 2s
400 B1 150 -104dBm -12dB -83dBm 5s
400 B3 1650 -100dBm -15dB -75dBm 2s