Community discussions

MikroTik App
 
dakobg
Member Candidate
Member Candidate
Topic Author
Posts: 120
Joined: Mon Nov 06, 2017 8:58 am

Wireguard peers endpoint port

Wed Aug 26, 2020 10:56 pm

Any idea how I can add port for peer endpoint ip address ? Look like only ip address is allowed aka (1.1.1.1 vs 1.1.1.1:51821)
Or I miss something ?
 
dakobg
Member Candidate
Member Candidate
Topic Author
Posts: 120
Joined: Mon Nov 06, 2017 8:58 am

Re: Wireguard peers endpoint port

Thu Aug 27, 2020 12:00 am

Any idea how I can add port for peer endpoint ip address ? Look like only ip address is allowed aka (1.1.1.1 vs 1.1.1.1:51821)
Or I miss something ?
Maybe is not important but is good to have
 
Sob
Forum Guru
Forum Guru
Posts: 9119
Joined: Mon Apr 20, 2009 9:11 pm

Re: Wireguard peers endpoint port

Thu Aug 27, 2020 12:36 am

It's currently not possible to enter it in Winbox. Until it's fixed, you can use command line, it's possible there.
 
m0x35
just joined
Posts: 2
Joined: Thu Aug 27, 2020 12:38 am

Re: Wireguard peers endpoint port

Thu Aug 27, 2020 12:42 am

You can specify port via /interface wireguard edit
It will even show you some sort of mask if endpoint is not set yet.
 
User avatar
Paternot
Forum Veteran
Forum Veteran
Posts: 953
Joined: Thu Jun 02, 2016 4:01 am
Location: Niterói / Brazil

Re: Wireguard peers endpoint port

Thu Aug 27, 2020 12:46 am

It's currently not possible to enter it in Winbox. Until it's fixed, you can use command line, it's possible there.
Webfig doesn't work too. I tried to create a tunnel with WebFig, and it didn't work (it uses the zero port - 10.10.10.10:0 - and You can't change it).

At this moment, Wireguard should be used through the CLI.

Who is online

Users browsing this forum: No registered users and 14 guests