I'm pretty new with MikroTik, and I'm hoping this is a simple problem to solve.
Code: Select all
[admin@MikroTik] > /export
# sep/06/2020 17:52:30 by RouterOS 7.1beta2
# software id = xxx
#
# model = RB952Ui-5ac2nD
# serial number = xxx
/interface wireless
set [ find default-name=wlan1 ] ssid=MikroTik
set [ find default-name=wlan2 ] ssid=MikroTik
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip vrf
add list=all name=main
/ipv6 settings
set disable-ipv6=yes
/ip dhcp-client
add disabled=no interface=ether3
/system clock
set time-zone-name=Europe/Lisbon
/system package update
set channel=development
This configuration works just fine on RouterOS 6 (the gateway state becomes "reachable"), and it's a pretty simple configuration, but I think I just lack the knowledge to know what I am missing.
FWIW - I got a long way down the road to creating a wireguard tunnel, but had routing problems once it was setup. Neither router could route beyond their own interfaces, I think because the gateways were seen to be unreachable. I paired the config back to the minimum to hopefully make diagnosing easier.