Hi,
upgrading/installing wAP R ac with v7.1beta2 fails:
Model: RBwAPGR-5HacD2HnD
Revision: r2
Firmware type: ipq4000L
Factory firmware: 6.44.5
Current firmware: 6.47.4
Upgrade firmware: 6.47.4
configuration: factory default
upgrade via Winbox V3.27:
- upload routeros-7.1beta2-arm.npk to root folder, reboot
=> not visible in Winbox anymore
=> power cycle after 10 minutes. Same behaviour: not visible in Winbox
(after downgrading to 6.47.4 via NetInstall to start over)
upgrade via NetInstall V7.1beta2:
- (verified using Wireshark): TFTP download of the "netinstall-install-image" or what you want to call it OK, finished (5982 packets)
- but nothing more.
- power cycle after 5 Minutes -> not visible in Winbox
The only way to get it back to life is to downgrade again to 6.47.4 using Netinstall.
This is is the second box showing the same behaviour (I returned the first box as I suspected a DOA)
Or did I miss something?
Best regards
Mathias