I contacted support they provided me with an image that seems to mitigate this issue.I have seen similar issues:
- moving a working ROS6.46 and ROS6.47 config to ROS7 (tried on beta2 and 7.0.1). Most Wifi clients do work, all the wired networks do work
(So I know that the system works as I have some clients working correctly on all Wired, Wireless, VLAN, bridge i/f etc.).
- Apple Ipad gets IP but has no Internet connection !
- SonOff (ESP based) devices do not get DHCP (while Amazon and others devices get one); and another IOT device (based as well on ESP Wifi chip) also does not acquire DHCP lease
I am right into debugging this... anything new on your side?
This is exactly the same problem I just came here to try to figure out. My hAP ac^2 on v7.1b2 has been so unstable, I have had to disable the wlan2 radio. I find that this problem also occurs when the interface is in 'station bridge' mode, just not "ap bridge'.Hi, same issue here.
hAP ac^2 v7.1b2, but it only happens on my 5Ghz interface.
After some uptime, one of the devices does not receive ip address from DHCP. And the only information in the log is that device is connected to wifi. Nothing about DHCP.
After reboot device is connected and after a day or two another one will have this problem.
Are you aware of fact, that this software is beta, not stable release? You can always use stable release, which is working fine.v7.1b2 is so unstable, I'm considering returning the whole device. Selling hardware with software that is not capable of the even most basic operations - holy moly. Every trunk-image of Openwrt has been more stable in the past.
Are you aware of fact, that this software is beta