Page 1 of 1

Wireguard between Mikrotik and Mullvad

Posted: Mon Nov 02, 2020 10:26 pm
by joda58
Hi!

I have a number of Linux hosts currently running
Wireguard with Mullvad.net as VPN provider.

But I am not an expert on Mikrotik.

I have checked the tunnel between my Mikrotik (https://mikrotik.com/product/RBwAPG-5HacT2HnD-BE) and Mullvad/Wireguard server.
I have set it up as described in https://wisp.net.au/forum/t/wireguard-v ... teros-7/61
No problem with the tunnel. I can ping and traceroute over the interface.

I have set up the Mikrotik as a "Home AP Dual" (see picture below).
ScreenHunter_ MY6CORE 2020-11-02 21.15_315.jpg
I have tried to change a IP routing and IP firewall but I .. (mess things up).... and then I have to start all over again.

Please could anybody tell me how to get all the traffic from 192.168.77.0 network to go through the Wiregard interface?

Regards,
Jonas D.

Re: Wireguard between Mikrotik and Mullvad

Posted: Tue Nov 03, 2020 3:25 pm
by Larsa
As I undersand you have a working tunnel to the Mullvad VPN server and everything is ok with the internet connection (ie "I can ping and traceroute over the interface"). But I guess you want to achieve something else?

Re: Wireguard between Mikrotik and Mullvad

Posted: Wed Nov 04, 2020 8:15 am
by rplant
Hi,

The following post might get you close.

viewtopic.php?f=1&t=165248&sid=51e92041 ... a9#p813884

Re: Wireguard between Mikrotik and Mullvad

Posted: Sun Nov 08, 2020 12:23 am
by joda58
Hi again!

Thanks for the help!
The link made my day: viewtopic.php?f=1&t=165248&sid=51e92041 ... a9#p813884
I got the tunnel to work ... but the performance is terrible!

Haven't had time to searched if anybody else has performance problems.

THANKS again!

Jonas D.