Community discussions

MikroTik App
 
hel
Member Candidate
Member Candidate
Topic Author
Posts: 199
Joined: Sun Jun 12, 2011 6:31 am
Location: Kirov, Russia

hAP lite 100% CPU on default config, frequent lock-ups since first ros7 beta

Fri Dec 18, 2020 3:36 am

Tried to test ROS7 from the very first public beta. Everytime I install ROS7, my router (hAP lite) locks up with 100% CPU load, makes its management and testing impossible.

Latest version tested was ROS7.1b3. After installing it was locked-up so winbox discovery see it for few seconds and it disappears from the list after few seconds. If I try to login, it will say "Logging in" or "Loading descriptors" without any progress.

I have performed hard-reset, unplugged a cable from WAN port. And only after booting it up and waiting for ~3minutes i have managed to access my router to look at the tool->profile (see attachment below). After another 5 minutes CPU load lowered to 4%, then I have updated a firmware and rebooted. After reboot I've logged in only after 3 minutes and see 100% CPU again, which had lowered to 1-4% after some time. But after some more time it peaks to 100% again, disconnecting me from winbox.

I've seen similar feedbacks on this issue before in some of the threads.
You do not have the required permissions to view the files attached to this post.
 
mducharme
Trainer
Trainer
Posts: 1777
Joined: Tue Jul 19, 2016 6:45 pm
Location: Vancouver, BC, Canada

Re: hAP lite 100% CPU on default config, frequent lock-ups since first ros7 beta

Fri Dec 18, 2020 4:25 am

I have performed hard-reset, unplugged a cable from WAN port. And only after booting it up and waiting for ~3minutes i have managed to access my router to look at the tool->profile (see attachment below). After another 5 minutes CPU load lowered to 4%, then I have updated a firmware and rebooted. After reboot I've logged in only after 3 minutes and see 100% CPU again, which had lowered to 1-4% after some time. But after some more time it peaks to 100% again, disconnecting me from winbox.
What happens if you log in and system->reset configuration with "no default configuration" checked?
 
hel
Member Candidate
Member Candidate
Topic Author
Posts: 199
Joined: Sun Jun 12, 2011 6:31 am
Location: Kirov, Russia

Re: hAP lite 100% CPU on default config, frequent lock-ups since first ros7 beta

Fri Dec 18, 2020 1:04 pm

What happens if you log in and system->reset configuration with "no default configuration" checked?
I tried it only once before, on the old 7.0beta3 or 4, it didn't solve a problem.
I have rolled back to 6.47 for now.
 
truefriendcz
newbie
Posts: 39
Joined: Mon Jun 05, 2017 11:07 am

Re: hAP lite 100% CPU on default config, frequent lock-ups since first ros7 beta

Fri Apr 15, 2022 11:49 pm

I have same probelm. On RB411L with version 7.x (7.2.1) CPU permanently 100% after clean configuration (with default config, and no default configuration too).
 
fragtion
Member Candidate
Member Candidate
Posts: 257
Joined: Fri Nov 13, 2009 10:08 pm
Location: Johannesburg, South Africa

Re: hAP lite 100% CPU on default config, frequent lock-ups since first ros7 beta

Sat Apr 16, 2022 8:53 am

Exactly what was happening on a SXT 5HnD for me. Runs 6.x fine, but 7.x 100% cpu even with no config. Unfortunately I destroyed the SXT the other day while trying to repair a hardware boot intermittency issue, so this is no longer a problem for me. But funnily enough, I do have a hAP lite too and that seems to run 7.x fine .. ?

RouterOS 7 runs fine on my RB433 which has the same CPU chip (1x core: MIPS 24Kc V7.4, @ 300MHz)... So I don't think it's a device limitation, it seems to be some kind of bug.
Last edited by fragtion on Thu Apr 21, 2022 2:24 pm, edited 2 times in total.
 
sterhTG
just joined
Posts: 11
Joined: Tue Mar 29, 2016 12:03 pm

Re: hAP lite 100% CPU on default config, frequent lock-ups since first ros7 beta

Thu Apr 21, 2022 1:45 pm

I have the same issue. hAP lite with default config -load 100%, without config - load 100%.
Can anyone help to resolve this ?
 
hecatae
Member Candidate
Member Candidate
Posts: 244
Joined: Thu May 21, 2020 2:34 pm

Re: hAP lite 100% CPU on default config, frequent lock-ups since first ros7 beta

Thu Apr 21, 2022 2:55 pm

Mine has no issues running 7.3beta34, 6 or 7% cpu usage.

Who is online

Users browsing this forum: No registered users and 21 guests