Page 1 of 1

dual wan failover with load balance on ROS7

Posted: Sun Jan 31, 2021 12:20 am
by hats
Hi All. I am trying to use ROS6 script on ROS7 device - but i stuck at two moments:

1st:
/ ip route 
add dst-address=0.0.0.0/0 gateway=10.111.0.1,10.112.0.1 check-gateway=ping 
2nd:
/ ip route
add dst-address=0.0.0.0/0 gateway=10.111.0.1 routing-mark=to_wlan1 
add dst-address=0.0.0.0/0 gateway=10.112.0.1 routing-mark=to_wlan2
How can it be done in ROS7? Thank you in advance.