Community discussions

MikroTik App
 
Cablenut9
Member Candidate
Member Candidate
Topic Author
Posts: 153
Joined: Fri Jan 08, 2021 5:30 am

hEX S: PoE voltage measurement is broken

Thu Feb 18, 2021 5:13 am

I upgraded my hEX S to 7.1beta4 today and now the PoE voltage measurement is broken. Eth5, which used to have auto on for PoE power out, doesn't work because the voltage is now too low. I set it to forced on and now it works. However, System -> Health shows no CPU temperature and the voltage is 0.5V, and it was showing 49.2V before.
You do not have the required permissions to view the files attached to this post.
Serial question asker
 
Cablenut9
Member Candidate
Member Candidate
Topic Author
Posts: 153
Joined: Fri Jan 08, 2021 5:30 am

Re: hEX S: PoE voltage measurement is broken

Thu Feb 18, 2021 5:45 am

Also, I noticed that in System -> Packages it lets me uninstall 7.1beta4 with no problem at all ("Uninstall" button in WebFig gives no errors). This almost made me have to use Netinstall because it rebooted several times until I downgraded to 6.49beta11.
Serial question asker

Who is online

Users browsing this forum: No registered users and 13 guests