Community discussions

MikroTik App
 
wsftech
just joined
Topic Author
Posts: 24
Joined: Wed Jun 10, 2015 12:19 am

OSPFv3 and RIPng

Sun Feb 21, 2021 1:18 am

According to https://help.mikrotik.com/docs/display/ ... col+Status

RIP and OSPF should be functional under 7.1beta4.

However, I've tested on RB3011, CRS309, and CCR1009, with fiber, copper, and DAC at 1 and 10G, and have suffered abject failure.

OSPFv3 results in the following in the log:
OspfInterface { { *2 0.0.0.0 0 0.0.0.0 } Point-to-Point PtP-unnumbered } wrong checksum from fe80::4a8f:5aff:fec9:cea1%*2

and similarly for broadcast interface type, etc.

RIP with AFI IPv6 gives the following error for any configured interfaces:
"interface has no IPv6 link local address" despite there palpably being dynamic link local addresses in the IPv6 address list. Is this a VRF failure?

Any advice welcome.
 
mducharme
Trainer
Trainer
Posts: 1138
Joined: Tue Jul 19, 2016 6:45 pm

Re: OSPFv3 and RIPng

Sun Feb 21, 2021 2:39 am

OSPFv3 results in the following in the log:
OspfInterface { { *2 0.0.0.0 0 0.0.0.0 } Point-to-Point PtP-unnumbered } wrong checksum from fe80::4a8f:5aff:fec9:cea1%*2
Yup, I get wrong checksum for everything too. Haven't found a solution yet.

Who is online

Users browsing this forum: No registered users and 8 guests