According to https://help.mikrotik.com/docs/display/ ... col+Status
RIP and OSPF should be functional under 7.1beta4.
However, I've tested on RB3011, CRS309, and CCR1009, with fiber, copper, and DAC at 1 and 10G, and have suffered abject failure.
OSPFv3 results in the following in the log:
OspfInterface { { *2 0.0.0.0 0 0.0.0.0 } Point-to-Point PtP-unnumbered } wrong checksum from fe80::4a8f:5aff:fec9:cea1%*2
and similarly for broadcast interface type, etc.
RIP with AFI IPv6 gives the following error for any configured interfaces:
"interface has no IPv6 link local address" despite there palpably being dynamic link local addresses in the IPv6 address list. Is this a VRF failure?
Any advice welcome.