Route filter for BGP not working in v7.1 beta 6
[kalpak@MikroTik] /routing/filter/rule> print
Flags: X - disabled, I - inactive
0 chain=secureshit-out
rule= if ([protocol static ] || [prfx value=dst<equal>2a0e:8f02:2110::/44])
then={ action accept }
1 chain=secureshit-out
rule= if ([protocol static ] || [prfx value=dst<equal>2a0e:8f02:2110::/46])
then={ action accept }
2 chain=secureshit-out
rule= if ([protocol static ] || [prfx value=dst<equal>2a0e:8f02:2114::/46])
then={ action accept }
3 chain=secureshit-out
rule= if ([protocol static ] || [prfx value=dst<equal>2a0e:8f02:2118::/46])
then={ action accept }
4 chain=secureshit-out
rule= if ([protocol static ] || [prfx value=dst<equal>2a0e:8f02:211c::/46])
then={ action accept }
5 chain=secureshit-out
rule= if ([protocol static ] || [prfx value=dst<equal>2a0e:46c4:2c00::/44])
I have added blackhole route yet it doesn't export any router. ipv6 route print doesn't give any output. Opened a ticket with support.rif for ipv6 route print issue.
kalpak@MikroTik] /routing/bgp/connection> print
Flags: D - dynamic, X - disabled, I - inactive
0 name="secureshit-v6"
remote.address=2a09:4c0:57e0:43::1 .as=58057
local.address=2a09:4c0:57e0:43::2 .role=ebgp
connect=yes listen=yes routing-table=main router-id=main templates=ipv6-ebgp as=213326 address-families=ipv6
output.filter=secureshit-out .network=""