NTP Client is borked
I can't get NTP Client to work at all on my RB4011 with 7.1beta6. I set it to Enabled, added addresses in the Servers section, yet it refuses to update. The same addresses worked on a different device with v6, so this is likely a bug with v7
Re: NTP Client is borked
Without seeing your config hard to say.
Re: NTP Client is borked
What mean "borked" on the title?
Translate says is "Bored" on Hungarian....
NTP Client is bored?
Translate says is "Bored" on Hungarian....
NTP Client is bored?
Re: NTP Client is borked
I found that the NTP client can only be configured properly from the CLI. Certain things like using DNS names for NTP server addresses do not work in the GUI. Configure it through the CLI instead and see if there is still a problem.
These are the settings I use (a verbose export):
These are the settings I use (a verbose export):
Code: Select all
/system ntp client
set enabled=yes mode=unicast servers=pool.ntp.org
/system ntp client servers
add address=pool.ntp.org auth-key=none disabled=no iburst=yes max-poll=10 min-poll=6
Re: NTP Client is borked
"Borked" is a funny/slang take on "broken" ;)What mean "borked" on the title?
Translate says is "Bored" on Hungarian....
NTP Client is bored?
Re: NTP Client is borked
Ah, ok...
Who is online
Users browsing this forum: No registered users and 17 guests