- Version number: 7.1beta6
- Router's model: RB4011iGS+5HacQ2HnD
Steps to reproduce the issue:
Code: Select all
[admin@router] > /system reset-configuration skip-backup=yes
Dangerous! Reset anyway? [y/N]:
y
system configuration will be reset
Rebooting...
[42031.635046] reboot: Restarting system
:00000050
AL31400X-140
RouterBOOT booter 7.1beta6
RB4011iGS+5HacQ2HnD
Code: Select all
SCRIPT ERROR: expected end of command (line 101 column 16)
Code: Select all
[admin@MikroTik] > /log/print without-paging
00:00:04 system,info crossfig will upgrade version 6 configuration
00:00:04 system,info router rebooted
00:00:17 system,error,critical error while running default configuration script: expected end of command (line 101 column 16)
00:00:17 system,error,critical
00:00:18 system,info,account user admin logged in via local
Code: Select all
[admin@MikroTik] > /system default-configuration print without-paging
...
Code: Select all
/interface wireless {
Code: Select all
set $ifcId channel-width=20/40/80mhz-XXXX;
set $ifcId secondary-channel=auto
set $ifcId frequency=auto
Code: Select all
[admin@MikroTik] > /interface/wireless/
access-list channels interworking-profiles nstreme-dual sniffer add edit find print reset-configuration setup-repeater wps-client
align connect-list manual-tx-power-table registration-table snooper comment enable frequency-monitor remove scan spectral-history wps-push-button
cap info nstreme security-profiles wds disable export monitor reset set spectral-scan
And just to add, device doesn't have IP address set:
Code: Select all
[admin@MikroTik] > /ip/address/print
[admin@MikroTik] >