Community discussions

 
bda
Member Candidate
Member Candidate
Topic Author
Posts: 126
Joined: Fri Sep 03, 2010 11:07 am
Location: Russia,Moscow

snmp problem on multi core x86 system

Sun Apr 17, 2011 3:21 pm

Good day!

I think, snmp subsystem counts only one core on multi cpu x86 system. After I bind network adapters per separate cores - it reports very low cpu usage.Cpu usage in winbox stays the same.

Dear developers, please help.

PS Memory and disk OID still not working at all.
You do not have the required permissions to view the files attached to this post.
God bless UNIX!
 
fewi
Forum Guru
Forum Guru
Posts: 7734
Joined: Tue Aug 11, 2009 3:19 am

Re: snmp problem on multi core x86 system

Sun Apr 17, 2011 6:55 pm

Just a quick comment to point out that the official support channel is email to support@mikrotik.com. Mikrotik staff may or may not read this thread.
Specific answers require specific questions. When in doubt, post the output of "/ip address print detail", "/ip route print detail", "/interface print detail", "/ip firewall export", and an accurate network diagram.
 
bda
Member Candidate
Member Candidate
Topic Author
Posts: 126
Joined: Fri Sep 03, 2010 11:07 am
Location: Russia,Moscow

Re: snmp problem on multi core x86 system

Mon Apr 18, 2011 2:11 pm

Just a quick comment to point out that the official support channel is email to support@mikrotik.com. Mikrotik staff may or may not read this thread.
Thanks, but maybe anybody facing such problem... I think all x86 multi-core devices have it.
God bless UNIX!
 
User avatar
janisk
MikroTik Support
MikroTik Support
Posts: 6283
Joined: Tue Feb 14, 2006 9:46 am
Location: Riga, Latvia

Re: snmp problem on multi core x86 system

Wed Apr 20, 2011 12:59 pm

get OID:
/system resource cpu print oid 
on test router i get
admin@tst] > sy resource cpu print oid 
 load=.1.3.6.1.2.1.25.3.3.1.2.1 

 load=.1.3.6.1.2.1.25.3.3.1.2.2 
router has 2 cores
$ snmpget -c public -v 1 tst .1.3.6.1.2.1.25.3.3.1.2.1
iso.3.6.1.2.1.25.3.3.1.2.1 = INTEGER: 7

$ snmpget -c public -v 1 tst .1.3.6.1.2.1.25.3.3.1.2.2
iso.3.6.1.2.1.25.3.3.1.2.2 = INTEGER: 0
 
bda
Member Candidate
Member Candidate
Topic Author
Posts: 126
Joined: Fri Sep 03, 2010 11:07 am
Location: Russia,Moscow

Re: snmp problem on multi core x86 system

Thu Apr 21, 2011 7:05 pm

get OID:
/system resource cpu print oid 
on test router i get
admin@tst] > sy resource cpu print oid 
 load=.1.3.6.1.2.1.25.3.3.1.2.1 

 load=.1.3.6.1.2.1.25.3.3.1.2.2 
router has 2 cores
$ snmpget -c public -v 1 tst .1.3.6.1.2.1.25.3.3.1.2.1
iso.3.6.1.2.1.25.3.3.1.2.1 = INTEGER: 7

$ snmpget -c public -v 1 tst .1.3.6.1.2.1.25.3.3.1.2.2
iso.3.6.1.2.1.25.3.3.1.2.2 = INTEGER: 0
It works! Thank you very mutch!
God bless UNIX!

Who is online

Users browsing this forum: No registered users and 40 guests