Community discussions

 
hedele
Member
Member
Posts: 338
Joined: Tue Feb 24, 2009 11:23 pm

Re: v6.19rc for CCR tests needed!

Fri Aug 22, 2014 1:22 pm

Linked ALMOST correctly :) it's actually 13.25.6
13.25.6 AutoIsolate

A Boolean. Set by management if isolate (13.25.20) is to be set, causing a Designated Port to transition to Discarding if both AdminEdge (13.25.1) and AutoEdge (13.25.5) are FALSE and the other bridge presumed to be attached to the same point-to-point LAN does not transmit periodic BPDUs—either as a Designated Port or in response to BPDUs with the Proposal flag set (see 13.21). The recommended default of this parameter is FALSE. AdminEdge and AutoEdge are both reset only on ports that are known to connect to other bridges.
 
newbie1
just joined
Posts: 2
Joined: Sun Aug 24, 2014 3:39 pm

Re: v6.19rc for CCR tests needed!

Sun Aug 24, 2014 3:56 pm

Hi, I have a CCR1016-12S-1S+ thanks to this update (6.19rc) has lowered the consumption during syn floods. (In my case 50% less) but the problem comes when there are no firewall rules, made ​​a flood the CPU load goes up to 100% and the computer restarts itself. I already sent the ticket a few days ago. Someone feels the same?

Regards
 
DrDeft
just joined
Posts: 21
Joined: Sat Jun 30, 2012 2:16 pm

Re: v6.19rc for CCR tests needed!

Tue Aug 26, 2014 12:55 pm

 
LightnetBarry
just joined
Posts: 13
Joined: Tue Jun 05, 2012 2:56 pm

Re: v6.19rc for CCR tests needed!

Tue Aug 26, 2014 6:23 pm

v6.19rc seems to be unavailable again, all links revert back to homepage.

Barry
 
kivimart
newbie
Posts: 40
Joined: Thu Oct 10, 2013 3:06 pm

Re: v6.19rc for CCR tests needed!

Tue Aug 26, 2014 6:46 pm

I Think final 6.19 is near.

Skickat från min HTC One via Tapatalk
 
IntrusDave
Forum Guru
Forum Guru
Posts: 1284
Joined: Fri May 09, 2014 4:36 am
Location: Rancho Cucamonga, CA

Re: v6.19rc for CCR tests needed!

Wed Aug 27, 2014 8:31 am

The RC download link appears to be the final. Change log indicates the same.
David Joyce
Network & Security Engineer
Intrus Technologies, LLC.
Rancho Cucamonga, CA, USA
 
LightnetBarry
just joined
Posts: 13
Joined: Tue Jun 05, 2012 2:56 pm

Re: v6.19rc for CCR tests needed!

Wed Aug 27, 2014 5:19 pm

v6.19 is now available as the stable download however the RC special release links are still in place but lead only to the homepage.

I guess my confusion was in expecting the RC download links to be removed once the release was final. ;-)

I have v6.19 installed now, lets see how it goes...

Barry.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2286
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v6.19rc for CCR tests needed!

Wed Aug 27, 2014 7:20 pm

I guess my confusion was in expecting the RC download links to be removed once the release was final. ;-) Barry.
+ 1
LAN, FTTx, Wireless. ISP operator
 
adrcomms
newbie
Posts: 28
Joined: Fri Feb 10, 2012 11:58 am
Contact:

Re: v6.19rc for CCR tests needed!

Tue Sep 09, 2014 10:34 pm

We loaded 6.19 on our ccr 36, simple queues very fast and cpu load very low.

problems:
customers on pppoe started to get double ip's as we permit 2 ips per account, one for the cpe at home and the other to be used on the hotspot, never seen two ip's on other versions.
hotspot started to block authorised clients or bypassed ip ranges.

backed down to v6.6 as this stable but the simple queues are slower.

Adrian
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6615
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: v6.19rc for CCR tests needed!

Thu Sep 18, 2014 3:15 pm

adrcomms,

it would be great to get debug logs from your router and more details about the problem.
Please contact support (support@mikrotik.com) with such information or provide us with ticket number.

Who is online

Users browsing this forum: No registered users and 42 guests